Raspberry Pi Tutorial on Connecting the Ultrasonic sensor HC SR04

preview_player
Показать описание
Connecting the Ultrasonic Sensor( HC-SR04) to the Raspberry Pi to measure distance.

Coming Soon:

Equipment you need:

Other Info:

Credits:
The steps in this tutorial, including the code, were obtained from the Pi Hut at the link below, with minor adjustments.

Reference:

PS: Some of the links in this description are affiliate links that I get a kickback from
  1. RaspBerry Pi Made Easy
  2. Ultrasonic Sensor
  3. Raspberry Pi to Ultrasonic Sensor
  4. HC-SR04
  5. Connecting Raspberry Pi to Ultrasonic Sensor
  6. Simple Ultrasonic Sensor Connection
Рекомендации по теме
How to set 0:00:30

How to set up a Raspberry Pi

Raspberry Pi Beginner's 0:06:24

Raspberry Pi Beginner's Guide: Install and Setup NOOBS

The New Method 0:21:14

The New Method to Setup Raspberry Pi (2023 Update)

SETUP TO PROJECT 0:22:05

SETUP TO PROJECT in 20 mins | Raspberry Pi Tutorials for Beginners

Raspberry Pi Explained 0:02:08

Raspberry Pi Explained in 100 Seconds

Raspberry Pi Tutorial 0:07:12

Raspberry Pi Tutorial on Connecting the Ultrasonic sensor HC SR04

Connecting to Wi-Fi 0:06:24

Connecting to Wi-Fi and Using SSH - Raspberry Pi for Developers

Raspberry Pi 4 0:24:54

Raspberry Pi 4 Getting Started

RGB LED - 0:04:48

RGB LED - Raspberry Pi Pico - Tutorial

Raspberry Pi - 0:29:16

Raspberry Pi - How to Begin Coding Python on Raspberry Pi

#369 Definitive Guide 0:13:22

#369 Definitive Guide to Attaching Sensors to the Raspberry Pi (Tutorial)

Connecting Raspberry Pi 0:13:39

Connecting Raspberry Pi w/ Pixhawk and Communicating via MAVLink Protocol

Raspberry Pi Remote 0:03:27

Raspberry Pi Remote Desktop Connection

How to access 0:05:11

How to access Raspberry pi remotely with VNC direct connection and cloud connection

How to Enable 0:12:59

How to Enable SSH on a Raspberry Pi (and connect via IP)

Raspberry Pi Tutorial 0:14:05

Raspberry Pi Tutorial (Model B+) - Using a Breadboard and LED’s

How to connect 0:07:14

How to connect Raspberry PI to LAPTOP with LAN cable

Raspberry Pi Node-RED 0:07:24

Raspberry Pi Node-RED Tutorial (For Beginners)

The New Method 0:23:59

The New Method to Setup Raspberry Pi Zero (2023 Tutorial)

Connecting To The 0:05:53

Connecting To The Internet With The Raspberry Pi Pico W (via WiFi)

How to Setup 0:31:31

How to Setup a Raspberry Pi LEARNING Desktop (Linux, Hacking, Coding)

Raspberry Pi GPIO 0:48:40

Raspberry Pi GPIO - Getting Started with gpiozero

Raspberry Pi IoT 0:12:32

Raspberry Pi IoT Server Tutorial: InfluxDB, MQTT, Grafana, Node-RED & Docker

How To Install 0:10:16

How To Install & Set Up Raspberry Pi OS - Pi4 Pi3 Pi2

Комментарии
Автор

bro seems you connected pin 2 to negative railway and pin 6 to positive railway can you please confirm

vomm
Автор

i don’t have a 2kohm resistor, but i have lots of 1KOhm. how would i wire it that way?

Detopie
Автор

Can i add 2 more sensor in the same raspberry? volts/amps problems?

siriustoolshobbies
Автор

Hi can i ask you please, is there's is a sensor that can present radar sensor ( calculating speed and velocity ) ? if yes tell me and thaak you so much brother

lagtabhamza
Автор

I'm not getting a continuous output. I need to keep pressing Run on the code in order to get a single reading. Anyone knows how to fix this?

crashhhhhhh
Автор

im getting waiting for sensors to settle then no reading any idea bro whatwent wrong

vomm