How to Make a Simple Clutch or Brake Bleeding Kit

How to make and use a simple clutch and brake bleeding kit. Here I am using it to bleed the clutch system on a 2000 Toyota Yaris 1.0 petrol. On this, and many other cars, the clutch and brake fluid are topped up from the same brake fluid reservoir. On some other vehicles the clutch and brake systems have separate fluid reservoirs so check before you bleed it. If in doubt, consult with your car owner's manual. Thanks for watching. If you found this video helpful, maybe you could consider supporting my channel by using the ‘Super Thanks’ button below the video. Your support would be really appreciated, thank you !. Please comment, like and subscribe !.

~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.

All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.

Read important information below:

Disclaimer

Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[screwsnutsandbolts]

Thanks for watching !
Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons.
Your support will help me to continue and improve my videos 👍

[TT-ddtv]

Seriously appreciate this step by step video w/out a 10 minute youtuber diatribe added in about blah blah blah. Very helpful. Yes I subscribed.

[lukeparnell]

This video is by far the best step by step ive ever seen for clutch bleeding. Great job. Keep making videos like this. 👑

[justdanijel]

Replacing Clutch master cylinder tomm on my Semi. Gonna try this out see how it works.

[WilsonPhotledi]

I wish i could pay you 😢😢youre video has done wonders in my car..

[blacquejacque]

Dude, this video was awesome and very helpful I never knew this technique until I saw this video last night.
For the record I worked on a clutch today and with this technique here I was able to get the slave cylinder pushing within 20 minutes.
Thank you very much
Love from PNG🇵🇬

[GrthxAlot]

This is the best and easiest method out there. Great video!

[phyomauk]

Very informative video. I will create the bottle as you mentioned in this video. Thanks a lot.

[zakimerchant]

This is the best.... no rev up the engine... or any other bs

[aaronsanford]

This is the best repair video i have ever seen in my life, very good info and filming. A like from me 👍🏻

[tonyn]

very good video my friend. most of them bleed kits under £10 are cheap and rubbish im going to make one of these. all the times I've done this job and wished id had another pair of hands to keep the fluid topped up but like most of us DIY guys theres no one around. Tony Leics uk

[carlomagnotm]

Thx so much🙌🏻 this helped me alot to bleed Aisin Clutch master cylinder

[robt]

Thanks. I'm off to buy some fluid then follow your instructions. 😊

[mccleavage]

Incredible video. Thanks for the clear instructions!

[actionweekendwarrior]

Best one man show bleed cod on the tube. Had to sub. Nice work.

[josephcazzuto]

Amazing vid. Thanks for posting. I liked and subscribed.

[Kinematographer]

You actually don't even need this. Look into gravity bleeding. It's so easy and clears the lines.

[wullemdeklerk]

I will try this method and check again

[nonenothing]

Much better. I saw one video the method is the same but i am confused with her explanation. Your .better. thanks bro

[magnuspersson]

My man, Thank you! I had to drain almost 1L of fluid before I got pressure in the pedal.