Power Injection Guide

How to set up your controller for power injection and connecting your power injection to the lights

[ThomasGlennon]

Beyond this, do you have any experience doing this with COB strips in an aluminum channel?

[papabrose]

Where did you get those pucks that have a connector between each puck?

[davidfleck]

are you running one DC injection wire with multiple drops along the way. Parrell wiring

[jpcantu]

Pretty straight forward process, but just to confirm. At the beginning you installed 2 power injection points to the actual controller. But in this install you are only using one power injection line? If you would need to use the second power injection line how would you go about doing that, lets say the house is 180 ft, or whatever ft is required to start using your 2nd PI line, would you still run that line threw the track, or would you cut across the entire house attic?

[honrado]

May I know what type of cable you use for power injection

[doncoleman]

Where can I purchase the input power box and controller? I need to inject power to a tree with LeD lights. There flickering now. I just need to make sure that I’m getting 12v at each section

[billfoster]

So you’re putting 2 Y-splitters at the spot where the next 5 LEDs will connect? Maybe you can make a short, close-up detail video of that.