Installation | GlowShift 10 Color Digital Series Quad Air Pressure Gauge for Cars and Trucks

Learn how to install a GlowShift 10 Color Series Digital Air Pressure Gauge and read (4) sections of your car or truck’s air ride suspension system, air tanks, air bags, or air horns independently.

DIGITAL AIR SUSPENSION PRESSURE GAUGE
GlowShift 10 Color Digital Series Quad Air Pressure Gauges are electronically driven and read (4) sections of your vehicle’s air ride suspension system, air tanks, airbags, or air horns independently. This electronically driven quad digital air suspension gauge displays levels from 0 to 200 PSI, identifying if aftermarket systems are getting an adequate amount of pressure. Each quad digital air pressure gauge includes (4) 1/8-27 NPT Electronic Air Pressure Sensors, (4) 1/4-18 NPT Manifold Adapters, Wiring Harnesses, and more for installation.

10-COLOR DIGITAL SERIES
The 10 Color Digital Series features a flat black gauge dial and low profile tinted lens with bright LED digital numerical readouts. Each gauge has an ultra-thin design with a depth of 1-1/16” (27mm) and display that measures 3/8” x 5/8” (9.5mm x 15.92mm). Set the display to one of 10 available colors. At startup, Self-Calibration Mode ensures the gauge is performing optimally. For easier viewing at night, connect the orange wire to the headlight switch source and the gauge will dim 50%.

WATER TEMP GAUGE INSTALL ACCESSORIES

Find us on social:

#GlowShift

WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the installation process.

[theskateboardt]

My set up is wires from the tank straight to switches on my dash but the previous owner of the car didn’t instal a manifold on the system. So since there’s no management for the air ride it’s just 4 switches that operate each bag on the car. So my question is do I need a manifold to run this glow shift pressure gauge? Even tho I don’t have digital management?

[gerisilvestre]

It is dangerous if the wires are short and I cut to make longer like an extension ?

[sterling-Dubois]

Will this help keep the front end or the backend level I have half inch lines and do not have an E level I have to level it out manually My back and always seems to have a SAG on one side

[josenarvaez]

I see that you have even number like 35 and 35 pounds on mine I got different readings on each side 🤷🏽‍♂️

[sterling-Dubois]

Will these sensors work on old earlier set up with Solenoids no manifold