GlowShift Tech Tips | My Elite 10 Color Series Gauge Won’t Stop Flashing

This video shows you a quick fix for your GlowShift Elite 10 Color Series Gauge if you powered it up and it won’t stop flashing!

GLOWSHIFT GAUGES FOR CARS AND TRUCKS
GlowShift Gauges is world renowned for providing exceptionally crafted and competitively priced automotive gauges with an extensive variety of styles and options. Over the years, GlowShift’s lineup of performance gauges and gauge pods has grown exponentially to include many of the most sought-after gauges in the automotive market. GlowShift continues to earn customer respect and loyalty with our free technical support, same day free shipping on select orders, and our one-year limited warranty on all of our gauges and pillar gauge pods.

CONNECT ON SOCIAL:

#GlowShift

Category Autos & Vehicles

WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.

[HypnoLizardHD]

Just got some put in my truck, my water temp gauge is flashing and the connections are good to the gauge and the sensor, what now

[TheTyGuy]

I had this happen on my boost guage after it came unplugged. Nothing has changed, confirmed okay sensor and connectors (only one on the 30psi guage) and still no good

[jrrequenez]

I’m having the same issue in my elite 10 wide band gauge ... I’ve checked all the connections and they are all good ...could the sensor be bad ?

[dfrm]

mine was working then I unplugged a battery to change my coolant filter. after plugging the battery in the gauge won't stop flashing. I checked all the connections and they seem fine. any suggestions?

[chrisschweikert]

So if my elite 10 fuel pressure 100 psi gauge sensor isn't hooked up to anything then turn it on with sensor connected it should read 100?

[mrpep]

This happened to a Maxtow transmission temp sensor after using it twice. First day, all gods, second day, all good, on that same day alter that evening I started truck and all I get is 240f for a couple of secs, down to 140f for a sec, down to 0f and then blinks nonstop. I check all plugs and wires going into sensor and all are on nice and securely, I even wiggled them and no luck. What's next ? I already requested a refund but I'm not in the mood to remove this, that's a lot of work. Looking for a solution.

[tommyv]

This was happening to me on my oil pressure guage. On 0:42 I put the wire connecting on the top left (black, white, yellow, and pink) to the right side just above the power connector. After that it looked like everything is working so far.