Installation | GlowShift 7 Color Series Oil Pressure Gauge for Cars and Trucks

Learn how to install a GlowShift 7 Color Series Analog Oil Pressure Gauge and monitor your car or truck’s oil pressure in real time to avoid harmful spikes.

OIL PRESSURE GAUGE KITS
Car and truck oil pressure gauges can be an important instrument in ensuring the longevity of any application. Each 2 1/16” Electric Oil Pressure Gauge can act as an indicator for your engine’s well-being and alert you to any problems before damage occurs. GlowShift has a variety of 52mm Oil Pressure Gauges that read and display vehicle oil pressure levels up to 100 or 150 PSI. Closely monitor your engine’s oil pressure in real time to ensure the bearings, crankshaft and other critical engine parts stay properly lubricated.

7 COLOR GAUGE SERIES
7 Color Series Gauges come standard with a cutting-edge design that will enhance your vehicle’s interior. Depending on which version you select, you’ll have the choice of a black or white gauge dial with a magnified clear or tinted lens and illuminated red needle. Easily cycle through the 7 Solid Color Modes and 2 Color Cycles available for the analog LED display. Solid Colors include Blue, Green, Red, Teal, Yellow, Purple and White.

AUTOMOTIVE OIL PRESSURE GAUGE INSTALL ACCESSORIES

CONNECT ON SOCIAL:

#GlowShift

Category Autos & Vehicles

WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.

[linksadude]

The narrator sounds like the guy for the buck naked deluth trading commercials.

[alexisfernandez]

What do you do with the factory oil pressure connector?

[xpavence]

I was so confident in myself until they started talking about the fuse box

[OnTheGasPack]

You guys are amazing for using a subaru for the guide! About to do this to my own! I can’t wait

[peterlakers]

did anyone notice he removed the oil sending unit and connection and didn't reconnect the unit ..
this means the computer will send a check engine code.. because there's no pressure the computer not picking up...

[bvandme]

Just replaced my old Glow Shift oil pressure & water temp gauges with the updated models, much easier to install now and all appear to be working correctly

[s.u.]

and what about the original Oil pressure sensor cable for the ECU? where does this now get the signal from?

[michelangelo]

i want to grab one for my 1990 eclipse GSX my OEM pressure gauge is pretty stupid and
i’d rather have accurate readings. the sensor is located low near the oil filter so running the wire and keeping it clean looking will be interesting to overcome lol

[ketchupheadd]

how do you run multiple gauges? wont one gauges expandable circuits in the fusebox get in the way of another gauges?

[rileyenia]

Be carful about using the location of the factory oil pressure switch a lot of cars won’t run properly if the computer can’t see oil lsi

[cherickospo]

Is this sensor independent of the computer codes? Does the check engine light not come on? Or does the red oil light only come on

[roadrichz_q]

What do you do with the factory oil pressure because the ecu will constantly show check engine light if its not connected.

[SuburbanRedneckGarage]

What did brass connectors did you use to move the sensor to where you needed it?

My mishimoto sandwich plate is just a hair too close to the engine block to install my sensor, so I need something to push it out a bit. Struggling to find what I need

[ashernathanvictoria]

Ive seen multiple video's about installing different gauges, what do you need if you want to install 3 gauge's, is there like some kind of hub to connect all the things too?

[hoodrichracing]

What size fuses for the gauge? And if I run multiple gauges to one tap, would I need to up the fuse size?

[XxODDXFUTURExX]

Anyone that buys any gauges and has never installed it won’t be this easy especially if you are installing the gauge apillar on your apillar wires don’t reach so you gotta run extra wire also so yah have fun with this project

[jstx]

If we have 2 gauges do we connect the wires together for the fuse tap?

[damonleeb]

What to do if the fuse wires don’t reach my fuse box?

[angelamaral]

So if I want to run 3 gauges like this video can I just wire 2 of the gauges to one gauge ?

[jrios]

I will do it on my MERCURY GRAND MARQUIS BUT I have little doubt I want to install two Glow shift temperature gauge and pressure oil gauge how to do it?