Samsung Washer Not Rinsing or Spinning? Learn How to Troubleshoot the Right Way!

Are you having problems with your Samsung washer not rinsing or spinning? Are you getting error 3E on your Samsung washer? If so, don't worry, we've got you covered. In this video, we'll show you how to fix Samsung washer not rinsing or spinning issues using our online appliance help videos.

Whether you're a Samsung owner or not, our online appliance help videos are a great resource for solving common problems. We'll show you how to fix Samsung washer not rinsing or spinning issues using our simple step-by-step instructions. So don't hesitate to give us a try!


✅Subscribe to our channel to evolve part of our channel. Thanks for visiting our channel. Hope this Video was useful for you. Please comment, like, share and subscribe to the channel to get more videos like this.

Thank you!

As an Amazon Associate I earn from qualifying purchases.

[erickvillatoro]

Thank you for sharing this video.
It was very helpful!

[thepatriotwarrior]

I saw a video where the door lock was the reason the washer wouldn’t go into spin. Could that be the case as well or checking voltage the only way to tell what’s up? Thanks

[maxheadroom]

awesome vid!, helped me out!! hey can u put a link to those awesome test leads? Thanks!

[shinigamii]

First I would like to thank you for the good work you are doing. This is the most helpful channel I have found so far for appliances repair.
I would like some help with diagnosing my Samsung washer. I have the ecobubble model number WF19H9000KW. I keep getting the error 8E1 in diagnostics mode, also the machine will only do the wash cycle but won't do the spin and rinse. It will also only work with one program, the other programs dont show time and only drain water then stop. I have not found any video or help online for this issue. Do you have any ideas?

[abstract.stardust]

mine stopped at 7 now reading SC, water still in drum

[Skipperj]

Thank you so much for the video and I have a Samsung wf42h5000aw/a2 that has a 3E2 code. It washes then it sometimes it won't advance to rinse and spin. Checked for loose wiring, and seems good.drain and wash pumps, and water valves ok. Your opinion would help, please

[MecitSuleyman-tcki]

How could I know if it is the motor board or the motor is defective

[MoK]

hmmm I replaced both pcb boards on my washer and I was finally able to use it and actually use the touch pad but now when I tried to test it the tub isn't spinning. there's no errors but when I click on just spin cycle I can hear the pipes draining but the tub doesn't want to spin. there's no humming either.

[pedrohernandez]

I have a 3C2 code, changed the inverter mode and its the same it spins in mode 8 but very slow could you help me?

[kerrigan.]

I am getting a paused load it seems without spinning the clothes out. When I run the SPN test, sometimes I get 3e2 code. I run other spin tests without any error and seems to spin up over 1000rpm.
I don't get the pause in turning like you do in the video.
I haven't done any ohm testing on the inverter board, hal sensor or stator.
because it seems somewhat random I don't know where I should try to narrow it down?
no error codes come up on the display, only if I run the diagnosis test spin but randomly.
any suggestions where to start?
wf45h6300ag/a2 washer

[EthanRoberts-szbd]

My washer is washing everything but is still leaving my clothes soaked after competition