How to install a metal roof? | Direct-to-deck | Steel Canada Roofing and Siding Limited

preview_player
Показать описание
How to install a metal roof? | Titan Northern Slate | Steel Canada Roofing and Siding Limited

Tools required
for the Installation

• 6 inch hand benders
• Chalk line
• Cordless Drill
• Cordless Shears (Battery Powered)
• Hammer
• Hand Break
• Left and right sheet metal snips (Reds & Greens)
• Measuring Tape
• Safety Harness

Procedure:
00:36 - Step 1. Install the starter strip
01:02 - Step 2. Apply membrane
01:20 - Step 3. Apply ice and water shield
01:40 - Step 4. Install the valley flashing (if applicable)
02:35 - Step 5. Install the valley flashing (cont’d)
04:14 - Step 6. Place the adjustable starter in the valley
05:34 - Step 7. Install the gable
06:34 - Step 8. Caulk the valley
06:45 - Step 9. Apply Expandable M-Seal
07:12 - Step 10. Install the direct-to-deck metal panels I
07:30 - Step 11. Install the direct-to-deck metal panels II
08:54 - Step 12. Install the Snow Guard
09:38 - Step 13. Lock in panels and press panel edges
11:38 - Step 14. Installing difficult trim panels I
12:50 - Step 15. Installing difficult trim panels II
13:45 - Step 16. Installing difficult trim panels III
14:08 - Step 17. Install the trim line vent system
14:30 - Step 18. Install the ridge and hip caps

Visit our Office:
355 Traders Blvd. East,
Mississauga, Ontario,
Canada
L4Z 2E5

Warehouse:
375 Matheson Blvd East
Mississauga, ON
Canada
L4Z 1X8
Рекомендации по теме
Комментарии
Автор

I love this idea and no strapping involved.

kingtut
Автор

Can this be installed in a secure manner on existing houses with 1/2" Wafer Board? Or, is plywood decking required?

wbaham
Автор

Very informative, thank you for sharing.

gerardoquintero
Автор

I need you in Fl to do my roof. Great pro job

jascam
Автор

It seems like enclosed valley will trap all the debri and ice, this will allow shingles to rust.I can think of few different designs that are more practical.

pavelgonchar
Автор

Is there a vocational Training program for learning about roofing

bigbrotherinlife
Автор

筑木条, 木板, 防水胶纸.现代建造业趨势轻量不锈钢铝片, 筒形(倒V形)钢片代替重量重泥土瓦片.

pingpingchan
Автор

How do I find out the cost and how to order

dqrtdtg
Автор

Membrane in direct contact with metal? It will be gone in 1 year.

Akula
Автор

The Decra Tile on 2x2” Battons is a much more energy efficient design and looks more expensive.

jeffreylindley
Автор

Never cover asphalt shingles... EVER!!! Other than that GL.

rogerrandolph
Автор

The shingles are beautiful.
Your install isn't bad.
But needs improvement

jonathanrodriguez
Автор

The more I watch
I'm dumbfounded.

jonathanrodriguez