How to Replace Wheel Bearing And Hub Assembly 2009-2019 Ford Flex

Показать описание

Buy Now!

This video shows you how to install a new wheel hub and bearing on your 2009-2019 Ford Flex. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2013 Ford Flex SEL 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2009 Ford Flex
2010 Ford Flex
2011 Ford Flex
2012 Ford Flex
2013 Ford Flex
2014 Ford Flex
2015 Ford Flex
2016 Ford Flex
2017 Ford Flex
2018 Ford Flex
2019 Ford Flex

Tools you will need:
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 24mm Socket
• T40 Bit
• 1/2 Inch Ratchet
• Safety Glasses
• Drain Pan

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Рекомендации по теме

Комментарии

√ Watch the Video
√ Do it Yourself
√ Save Money

TRQ

That was probably the best informational video I've ever watched. Nothing was left out and the explanations were consice and simple. Very well done. Thank you.

deckerron

This video was great. The only thing I’d change is that you do not have to take off the tie rod end. I was able to easily get to the mourning bolts without ever taking that off. Thanks for this vid!

skiz

Great video but. . . If you live in the salt belt, things will not come apart that easy to the point where you will consider changing the whole knuckle. TRQ puts out great videos and changing the whole knuckle is not that bad hard to do.

jeffbrown

Very well done instructional video. All the steps were clearly explained, and the audio and camera work were first rate. Thanks.

phillittle

Excellent video! Well stated, great recording, very little editing "shortcuts", professional work. I thought about doing this myself, but I do not have half of the tools mentioned here, so this one might be over my head.

JamesPeterson-re