How To Fix Crack Windshield Car | It is work or Cap 🧢? Windshield Repair Resin

preview_player
Показать описание
How To Fix Crack Windshield Car | It is work or Hoax 🧢?

Racun Shopee | Cara hilangkan retakan di cermin kaca kereta

Item Details:

* 100% brand new and high quality
* Made of high quality material, durableand practical to use

* Easy to use and operate, easy to transport and store.
* This will save you a lot of money and time to buy new glass.
* Combined with curing light for better repair results.
* A practical car glass repair kit for all wise owners.
* It enables you to heal and repair all types of damage caused by traffic accidents, collisions and blows.

How To Use:

1.If damaged, cover the area with tape to prevent moisture and dust enter the damaged area.
2.The damage must be repaired as soon as possible to prevent small cracks from spreading.
3.The ideal application temperature is 60 to 90 ° f (15 to 32 ° c). The glue will dry under UV.
If there is no UV, repair the glue in the sun.
4.The surface must be clean and dry for correct maintenance.
5. If not needed, do not expose the glue.
6. This step is important! To reduce the risk of chemical contact with the skin and eyes, please wear safety glasses and gloves when using this product.

#crack #DIY #car
Рекомендации по теме
Комментарии
Автор

Windshield needs fluid on the inside as well get somebody to assist by applying pressure from the outside at the exact spot you’re repairing…thanks for the great results n following instructions

AFTER_EMPIRE
Автор

The resin works. The windshield just isn't being repaired properly. You have to use a tool that attaches to the windshield from inside the vehicle. It straddles the crack with suction cups. Then there is a rod in the middle that you line up with the crack and screw in towards the windshield applying pressure directly on the crack. This spreads the crack open so that it can be filled with the resin. The resin also needs to be applied with a q-tip dipped in resin. Start at the lowest parts of the crack and slowly move it upwards. Allow the resin to be pulled into the crack before advancing the q-tip. If you start from the top and work down, the resin will just run down and over the crack leaving air pockets. When finished applying the resin, go back inside the car and relieve the pressure by unscrewing the center rod on the tool allowing the crack to come back together. This will squeeze out any excess resin. Go ahead and remove the tool or slide it along and repeat for longer cracks. Then apply the curing strips. 👍

StrayDogTheExposer
Автор

You did that all wrong. Put your hand inside and push pressure onto the cracks as you pour the liquored on so it can fill the gap as the gap will be slightly apart by the pressure. Don't kill people's hope with a fake video just cause you can't follow instructions

thekaj
Автор

I think you should push the glass slighty from the inside to open up the cracks and the resin to fill the cracks up

ricardojr.marcelo
Автор

My car has the inside crack. Its hard to put resin between the crack. Is there any remedy?

kabunyankim
Автор

It's a shame that improper application of the product causes viewers to blame the product rather than the persons who clearly had not clue as to what they were doing. I can't really blame them because the simple instructions supplied with this "kit" do not make it clear that the windshield needs pressure from the inside to allow the resin to fully flow inside. There are other videos that show this technique clearly and the results look like the windshield never had a crack.
BTW those little suction cup "injectors" don't open up the crack - they still the inside helper.

randallscott-key
Автор

did the crack grow further or was the repair successfull?

lukasschmidt
Автор

if the windshield have a tint? the crack is visible on the inside than outside... is this still applicable?

BorgyManotoyOnline
Автор

How to order p.ung kasing windshield namin natamaan ng bato nagcrack po.

djlancedjpobre
Автор

Aapde mangavu hoy to kevi rite mangave

Satyam-vs
Автор

Cara buat xbetul..resin tu xmasok bebetul dlm rekahan tu..kne pakai suction cup utk press resin msok dlm crack tu bro

yusrock
Автор

Sure we cannot see the crack but the crack still there. With how hot, then sudden rain pour cold and repeat the crack may appear again😅. The only fix permanently is change windhield. I also did this for fast fix but if it become worse claim insuran

shininsemnia
Автор

Does this repair minor scratches on glass?

kennethmorning
Автор

क्या यह मोबाइल के टूटे हुए ग्लास में भी लगाया जा सकता है

Sartaj-fgig
Автор

Anu po Ang hinahalo kc nd po liquid ung inorder q

michaellaurel
Автор

This would be no good for single glazed house glass I guess ?

digitalmediafan
Автор

We had similar crack on our car. Still no idea how did it even happen ?😢

praneeth
Автор

The resin is designed to fill the crack so that the windshield retains it's sturdiness. It will never remove the actual crack.

edsabanac
Автор

Thank you so much for this tutorial. My windshield cracked and the insurance does not want to pay for it. So, I will do exactly what you are doing here. Thank you.

Freedom-jl
Автор

All this product did was take
my money and leave a mess on my windshield.

amygoo