Re-spool PolyTerra to BambuLab Spool for AMS

preview_player
Показать описание
I have found the printing of spool edges for my PolyTerra Cardboard spools to work in the BambuLab AMS rather time consuming and irritating. So I took the spool apart and inserted it to the reusable Bambu spool. To get rid of any slack I nailed it tight. Works perfect for me. Hope it helps!
  1. Ruud Kouwenberg
  2. Bambulab
  3. P1P
  4. AMS
  5. X1C
  6. PolyTerra
Рекомендации по теме
Re-spool PolyTerra to 0:01:04

Re-spool PolyTerra to BambuLab Spool for AMS

How To Refill 0:08:07

How To Refill Bambu Lab Filament Spools AND Save A TON of Money Doing It!

Converting a cardboard 0:03:04

Converting a cardboard filament spool to the Bambu Lab reusable plastic spool holder

Bambu Lab refill 0:00:26

Bambu Lab refill spools

Fixing cardboard spool 0:00:44

Fixing cardboard spool for AMS with 3D printing

The Bambu Lab 0:00:27

The Bambu Lab filament spools are all refillable

How to convert 0:03:15

How to convert cardboard spools to plastic spools for Bambu Lab AMS unit?

Swapping new filament 0:01:39

Swapping new filament on the Bambu Lab spools

Don’t waste your 0:00:32

Don’t waste your filament! eSUN spool adapter tips for BambuLab X1C/P1P/P1S #3dprinting #Bambulab

eSUN refilament solution 0:00:29

eSUN refilament solution for Bambu Reusable Spool

Bambu spool print 0:00:17

Bambu spool print

Respooling filament for 0:02:36

Respooling filament for Bambu Lab AMS

eSUN paper spool 0:00:28

eSUN paper spool solution for Bambu Lab AMS

Respooling Polymaker support 0:00:55

Respooling Polymaker support material onto an empty Bambu support W spool with RFID. #3dprinting

Cardboard Spool Adapter 0:02:12

Cardboard Spool Adapter

I designed a 0:00:27

I designed a fitting to work with some cardboard spools for the Bambu Labs P1P

Bent Cardboard Spools 0:00:44

Bent Cardboard Spools Suck! 🤬

Spool Winder for 0:00:28

Spool Winder for Bambu Lab X1 Carbon

Bambu Labs AMS 0:00:27

Bambu Labs AMS + Polymaker spools

BambuLab Spool Adaptor 0:00:57

BambuLab Spool Adaptor Tutorial

Reusable Spool #1. 0:00:10

Reusable Spool #1. Bambu X1 Carbon

Cardboard spool supports 0:00:56

Cardboard spool supports for polymaker on Bambu Carbon X1 #3dprinting #bambulab

Bambu Lab Must 0:00:35

Bambu Lab Must Prints: Part 3 - Reusable Spool

Fresh off the 0:00:56

Fresh off the printer - the filament spool is done! #3dprinting #bambulab #p1p

Комментарии
Автор

I have been doing this trick for my PolyLite PETG. I been having pretty good success not having to put a nail in the side.

NPAK
Автор

Wondering if a printed insert inside the cardboard roll would help keep it centered and avoiding the nail

wilbertpino
Автор

Also side note for the same price (actually cheaper in some cases) you can buy the Bambu refills, but polymaker offers more colors so this is still neat.

vlogs
Автор

Use a plastic nail to reduce the chance of damage if the steel nail works its way out.

thenextension
Автор

Do NOT follow this video, I tried to respool a polyterra 1kg onto a bambu spool, it was hard to even close the 2 sides together, and inside the AMS while printing it came loose, creating a spaghetti, I used scisors to untangle it, and now I have one big spaghetti mess of a roll, unable to use it in the AMS. There are adapters available for Polyterra that you should use instead. This video does not mention them, and as a beginner I was not aware they exist. Thanks Ruud, for messing up my spool.

semaphre