Liquid Piston | Rotary Engine

[jimpiaz]

3 power pulses per revolution. I'm not sure about fuel economy but I would imagine there is a lot of horsepower potential.

[jaceydesigning]

1) The liquid piston rotary engine is an internal combustion engine that uses a rotor with sealed chambers instead of traditional pistons and cylinders.
2) The rotor is filled with a high-density fluid such as water or oil that acts as both the working fluid and the sealing element.
3) As the rotor rotates, the sealed chambers move through different stages of the engine cycle, including intake, compression, combustion, and exhaust.
4) The engine can operate with a wide variety of fuels, including diesel, gasoline, and natural gas.
5) The lack of reciprocating parts in the engine design may reduce vibration and increase reliability.
5) However, the engine's efficiency and emissions characteristics have yet to be fully tested and compared to traditional internal combustion engines.
6) Further research and development are needed to fully explore the potential benefits and drawbacks of the liquid piston rotary engine.

[thomascorbett]

This is an amazing engine, it should be further developed .

[jimpiaz]

I was speaking in the strictest sense of the turm. With less reciprocating mass and 3 pulses per revolution you should be able to spin it fast. That faster you spin it the more work you do in a certain amount of time.
AKA horsepower.

[alhemmings]

F1 should be running these on liquid Hydrogen or Ammonia at 25, 000rpm.

[unagisama]

Theoretically it looks great, but it looks like a 3x 2 stroke guzzler per revolution at practical low compression. But it does seems to go easier on the stationary apex seals mounted on the housing. Idk built prototypes still runs like shit.

[JBLFANFUR]

Looks like a reverse rotary engine to me lol, looks interesting tho

[jauer]

Eu eliminaria o pistão vazado por um solido de material leve e resistente, varia 3 cabeçote em cada extremidade

[АлексейМ-гг]

На ёмобиль такой хотели поставить. Не смогли. Не всё так просто

[readthisdontread]

How long till walls are shaved flat? 😅

[dmitriyshabalin]

Is it possible to order this engine now, same size as Mazda RX-7 engine? If so, where can I order?

[houssemboucedra]

ماشاء الله كاس وسميشا ماشاء الله لا تسرب الهوى في سميشا ولا كسر في كاس ماشاء الله لاحولة ولا قوة الا بالله ماشاء الله قدر الله و ماشاء فعل محرك جيد ممتاز

[kingmasterlord]

and this is just a first pass at optimizing each stage of operation. a transitionary stage. this is the Ivysaur of rotary engines. let's make a Venusaur.

[ShannonSmithu]

The old rotary engines went through a ton of oil, trying to keep everything lubed, how did you overcome this?

[j.christie]

UCBerkeley made one in NanoTech dept. size of 1/2 dollar., for Hybrid micro power plant. 2005?

[jamest.]

What if the peanut ROTOR has a cam and valves inside it, and ported to near the eccentric shaft. The combustion chamber in the rotor with the valves in a wedge type ..., With only valves in it, and cam neat the eccentric, with oil pumped inside and back out, to keep from pooling, with the spark plug in the case where it aligns with the chamber,

[wormturned]

The compression ratio seems suspect, and that's what will make this engine viable or not.

[bsi-blakkseriesinitiative]

I think I know how to make this engine more efficient. o.o

Who is the inventor?

[BlockyCraft-ooji]

The only engine with less vibration would be a electric one

[LegionDarkMirror]

Źle jest to zrobione... Ile się tam pracy marnuje