Laser Welding vs. TIG Welding ! Most Satisfactory Factory Machines

For more information about welding machines and peripherals, contact the manufacturer to get more accurate answers.
NSWEL's email
↓↓↓↓↓↓↓

Hello everyone.
There are many different types of welding.
TIG welding, MIG welding, electric welding, CO2 welding, laser welding, etc...
Each welding method has its own advantages and disadvantages.
Accordingly, their uses are also different.
TIG welding and laser welding are widely used for thin sheet welding, sheet metal welding, and high-quality welding.
It's probably because it's appropriate for that purpose.
Today, we will briefly compare the differences between TIG welding and laser welding.
We will introduce the contents of how to use the laser welding machine and more various comparison videos later.
Thanks for watching and have a nice week.

#laser
#vs
#TIG
#laserweldingmachine
#Tigweldingmachine
#compare
#laserwelding
#argonwelding
#test
#welding
#machine
#steel
#crafts
#sheet
#Tips
#and
#tricks
#secret
#amazing
#DIY
#idea
#future
#technology
#HAGOJIBI
#video

[weldHAGOJIBI]

여러분 안녕하세요.
용접의 종류는 다양합니다.
TIG용접, MIG용접, 전기용접, CO2용접, 레이저용접 등등...
용접방법 마다 각각의 장점들과 단점들이 있습니다.
그에 따라서 쓰임새도 각각 다릅니다.
얇은 박판 용접이나 판금용접 그리고 고퀄리티 용접에는 TIG용접기와 레이저용접이 많이 사용됩니다.
그런 용도에 사용하기 적절하기 때문일 겁니다.
오늘은 티그용접과 레이저용접이 어떤 차이점이 있는지 간단하게 비교해보겠습니다.
레이저 용접기 사용방법에 대한 내용들과 더 다양한 비교 영상들도 차후에 소개시켜드리도록 하겠습니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.

사용된 알곤용접기
내쇼날시스템 300암페어 AC DC 알곤 용접기 AC DC NST 300FD
↓↓↓↓↓↓

용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓

내쇼날시스템 대표전화
051-941-9701~2

[mikeiver]

The Laser welder was feeding in filler metal for starters and the TIG was a simple fusion weld so apples to oranges. The discoloration of the tig was due to a lack of shield gas flow. If there had been sufficient flow with the gas lens on there the discoloration would have been minimal. With the TIG and a piece of small filler simply layed on top of the joint of the fusion pass it would have resulted in a far better finish.

[cjjuszczak]

Would be nice to see a cross section cut to see the penetration, etc but otherwise fantastic video, thank you!

[ЯрославГальмуев]

По чему не была показана обратная сторона свариваемых пластин в первом случае, интересна обратная сторона шва, есть ли провар ?

[dariovalbuena]

Excelente!! tú como siempre, explicando cual maestro, lo único es que la máquina de laser es muy cara saludos cuídate mucho

[inoxtech]

It would also be nice to compare the breaking point of the welding to understand the difference between TIG and LASER.
Thanks for your nice contribution

[peterchantry]

I would really like to know the strength test results between laser and TIG.

[Дмитрий-ощш]

Интересно посмотреть на результаты тестов сварных швов, на разрыв, глубину провара.

[nuneznaiu]

Здорово! 👍
Провар одинаковый или разный? Лазерная сварка видимо поверхностная, если говорить о качестве шва то tiq сварка мне кажется лидирует.

[ВадимГовин-ум]

Сваривание в глубоких карманах и в труднодоступных местах в студию!!

[teaganwindago]

I wish you spoke English but your welding speaks for itself. I've never seen a laser welder before. Very I hate to know the cost of the machine!!

[РоманСологуб-фт]

Как всегда классно показано и рассказано. Но есть одно но лазерная сварка очень дорогая, так что она не всем под силу

[ДенисПоляков-ыр]

Хорошо.
С идеальной подгонкой детали лазер великолепен.
А как он варит зазор?
Допустим 1-4мм.🤔

[driverjamescopeland]

The speed is awesome for sheetmetal work... but I would seriously question the bond and penetration, for anything thicker than 10 gauge.

[JamesPhillipsOfficial]

I think you should stress test both welds using a simple H shape, table design to test the sheer force to see which performs at the highest loading of weight. The methods work but we should ask ourselves, which is the stronger weld, by testing.

[kuwon]

박판이라 큰의미는 없겠지만 절단면 용입 상태를 볼 수 있으면 좋았을것 같은데 아쉽네요.
항상 좋은 영상 감사합니다.

[rydergw]

Really great tutorial. Many thanks for the English subtitles.

[맨날술이야-hq]

레이저 용접기에 대한 궁금증이 많습니다. 이렇게 소개해 주시는점 감사합니다.

[viorsa]

Excelente tutorial maestro, el láser es otro nivel, es como una evolución de la soldadura TIG, más rápida y limpia, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👍🤓

[joewboe]

Awesome video. Only thing I would have liked to see more of is the difference in penatration