Mazda 3 or 6 stalling and rough driving and idle issue (easy fix)

Help with high idle and rough driving and stalling

[ax]

Your hack worked great on my 2010 3i 2.0L with about 148, 000 miles. I definitely noticed an improvement at idle. Thank you!

[andrewlawrenson]

I thought I was going to be out of pocket fixing this problem after changing my battery. Used your fix, exactly as you said and boom all solved. Well done my man, you have saved me a few pounds

[diegosalazar]

Thanks bro it worked for my car. I really appreciate you and others who make videos like this because they really truly are a blessing.

[richardgentry]

I heard the same testimony in another video. Glad to hear it worked. Thank you.

[ChadHervig]

I was having this problem, thought it was the purge valve issue so I replaced that, and it still wouldn't idle without dying. I found this video and tried it. Let the car run as prescribed here, and then drove it around a while. Boom, all better. Thanks!

[aetrole]

I followed this step and while it was running in the driveway it got stolen.

[robertmenyhart]

Thank you so much it worked 2006 mazda 6

[meeka]

Life saver. Thankyou from Scotland. Worked a treat 😁

[thekkchannel]

My shit running smooth asf now. That’s crazy. Thought he was bullshittin

[dbyrne]

I believe this is the exact steps (from another video) on how to relearn the idle: 1. Disconnect negative terminal on battery for
10 minutes.
2. Reconnect battery terminal.
3. Turn ignition on for 1 minute but don't start the car.
4. Turn ignition back off for 1 minute.
5. Start the car and allow the engine to idle for
5 minutes without airconditioning or any fans on. Don't accelerate.
6. Turn engine off.
7. Start the car and turn on airconditioning and allow the engine to idle for 5 minutes without acceleration.
8. Turn engine off.
Engine Idle should now be reset.

[KrsBrs]

Unbelievable... it actually worked! Wow! Thank you so much. It's legit, people.

[AUSSIESEONE]

THANK YOU so much from Australia! 🇦🇺 i have a 2008 Mazda 6. I was getting so worried because nothing was fixing the problem, very rough idle and stalling when coming to a stop right after I had changed the battery, and didn’t have the money to take it in to a mechanic. Did a full service, changed spark plugs, MAF Sensor cleaned and nothing. As a last resort I searched on YouTube for a fix and this video came up, needless to say it worked! Thank you! How did you find this fix out?

[wrdominicas]

if it continues to run rough check your purge valve solenoid usually is stuck open allowing vacuum into the intake ..worked for me mazda 3 2006 2.3 engine running smooth

[DzDaBeaStt]

In this case will the car also have no power ? In my case the car struggles to get up to 15mph and will no go any more then that

[Semaj.]

Is this for the electric throttle body only ?

[TheTarheel]

Thanks bruh been an ongoing issue for me, even with transmission flush and thermometer replaced, even new battery. God bless

[dafekelvin]

My ac compressor it's no working. It's been disconnected.if let it run only 20mins or more?

[gutwrench]

This guy speaks the truth. Have a 2008 mazda 6. Changed battery twice and as soon as I cranked it. Would idle real low and shake. First time I had no clue what was wrong and it just fixed itself. 2nd time let in run in the drive way for 30 min. Problem fixed.

[mariobrg]

I'm going to try this ... maybe you just saved me my friend! Anyway thank you !

[johannakenwood]

If the car was to stall before the idle time was up (issue is car stalling at stop light/stop signs) do you just restart from the beginning?