Car Starts And Then Dies Right Away? - Try This Easy Fix

Does your car start and then stalls immediately? Try this first

❗️If you find this video helpful, I would appreciate donation to the channel or a $uper Thanks that can be found below the video.

🎦 Top 3 Reasons Why Your Car Won’t Start
🎦 Car Doesn’t Start? Does It Sound Like This? - Know The Difference
🎦 What To Do If Your Car Doesn’t Start - Completely Dead / No Power
🎦 No Crank, No Start - Dash Lights On
🎦 Symptoms Of A Seized / Locked Engine - How To Tell It’s Not A Bad Starter
🎦 Car Doesn’t Start But Cranks - Top 5 Things To Check

💰Save money on your car/truck maintenance and repairs:
Don't let Timing Belt Failure Happen
3 Symptoms Of A Bad Water Pump
Don’t Ruin Your Engine By Neglecting Engine Oil Filter - Simple & Cheap Maintenance
Why Does My Car Battery Die So Fast
Replace Timing Belt Before Engine Damage - Know Signs & Symptoms
Watch Out For Carbon Build-up That Can Cause Misfire
Top 6 Gas Saving Tips
Fix Sticky /Hard To Push Pedal - Simple DIY
Look what happens when you neglect your engine oil
Gas Pedal Sticks? Car Jerks? - Easy DIY To Make It Smooth & Safe
What Does An Exhaust Leak Sound Like? - And How To Find It
Clean & Test A Fuel Injector - Best DIY
Check your Engine, Coolant, Transmission, Power Steering Fluid, and Brake Fluids
Blown Head Gasket - Don’t Neglect Your Cooling System- Look What Happens
Don’t Get Stranded With a Dead Battery in Winter - Do 3 Top Battery Checks Now!
What Does Engine/ Serpentine Noise Sound Like And What Does It Mean? - Squeaking & Squealing Noise
Always make sure your lug nuts are TORQUED and not done with an impact gun
How to diagnose and replace wheel bearing going bad on any car
Learn why the tire pressure is important and how to check it in your car
Remove and replace Broken or Stripped Wheel Stud on most cars
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
Fast and Easy Way to Restore Faded Car Paint and Scratches - With Minimal Tools
The Best Way To Fix & Repair Broken Wire in Your Car - Soldering Car Wires Together
Car Air Conditioning AC Not Working? - Diagnose And Maintain It At Home
Replace Windshield Wiper Blades in 1 Minute

✅ Used Car Buyers Checklist - Private or Dealer - 5 Top Tips

⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
#motorcarnut
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

[pLYmbL]

What a legend!! Diesel juke stall. Not stalling without cable connected. It was a dirty Maf sensor. Cleaned it, had to clear motor yellow light that appeared for disconnecting the sensor using an odb reader. Now, working fine.

[josee.]

Thank you! Thanks to you it was discovered that the air sensor in my car had a fried cockroach inside the sensor and it was not making good contact. The car was giving many error codes on the computer. We would never have found the problem so quickly if it weren't for you. God bless you and your family.

[jackt]

Not sure yet if this is my problem but great respect to you for taking the time to respond to comments.

[TheCarnager]

These types of videos make youtube great. Thanks for sharing your experience.

[danielmecca]

Saved me a 1am in the middle of no where... thank you!!!

[sadysellis]

Hello hi, I'm sadys, first I have been trying to fix my car for two months Jesus two months myself my car is my job I do Uber and lift so. omg you are a life saver I can not force a mechanic so my 2015 Nissan Versa Note Star turned on and shut off, and seconds, after I changed the Gass pump and the catalyst, I did myself watching videos today I saw this video from you, and guess what I run outside to my car and disconnect the master flow censor and my car Dont shut off I'm starting to cry because I waste a lot of money doing all the Gass pump parts shit thing and is just the master flow censor I appreciate god putting your video today on my way thank you I fixed I'm going right now to outdo part to get the part and change thank you so much, god bless you and bless the internet

[BonnieCourt]

Thank you for help buddy, it happened to me and I was stock on I-495, did what you said and was able to get home safe, thank you again!!!!

[tyjack]

Saved the day! 2018 subaru outback 3.6. Started and stalled. Disconnect worked. Thank you!

[rodneyramjit]

Thanks man you save me I was lost took that out and it started

[fernandouribe]

Thanks a lot sir I just fixed the issue on my wife car a 08 Ford Fussion ur the man!!!

[Lawknee]

omgomgomgomgomgogomgomg
This saved me so much
I am so tickled that I can easily replace this sensor myself!

[msevans]

Thank you i did pull one sensor connect to the air filter box but that did not make a difference. What's a sensor like you showed connected to the throttle body did the trick.

[dentonmatthew]

That saved a (likely expensive) diagnosis etc THANK YOU. Acura MDX 2010

[mashapimatimba]

I had this exact issue
When the car starts, it used to vibrate alor too

Cleaned my airflow sensor, and it worked like a charm.

[ahmadnawaz]

Excellent experience.. really appreciate. Its really worked for me.

[cornfusedatbest]

2002 Dodge Ram 5.9 L starts and immediately stalls. It doesn't have a mass air flow sensor. I'm going to look at the throttle position sensor, but I'd like your thoughts before I start tearing shit apart. Thanx in advance.

[christians]

not sure if itll work but regardless i appreciate this video

[Chan]

I have the same issue and I put it back in but it's still running what should I do

[AndreiDinica-swvr]

Hi mine have the same issues but when I connect the maf sensor back with the engine runing it doesn’t stall
It mean is not the maf sensor ?
Thank you

[cutelife]

It would be great if you could tell me how I can fix this problem