Bicycle maintenance. How to lubricate the bicycle

This video is about bicycle maintenance.
How often do you change the grease in the wheel hubs of your mtb bike?
Cyclists often don't realize that you need to change the grease every 2000 - 3000 km.
It is necessary to disassemble the bicycle wheel hubs in order to detect internal damage on the cone nuts and bulk bearings.
If the bearing is not replaced in time, it can damage the inside of the wheel hub.
Today we will be disassembling a common hub design on bulk bearings.
We will clean and change the oil.
Video with no spoken words, featuring only technical noises. Language barriers are irrelevant; follows a DIY video style.
This video is for people who are passionate about bicycles.

00:00 Bicycle maintenance.
01:02 Removing the center-lock brake rotor.
01:34 Removing the bicycle cassette.
02:19 Opening the rear bicycle wheel hub.
03:28 Cleaning the hub axle and cone.
04:55 Cleaning the bearing balls.
06:14 Removing the bicycle hub seals.
07:10 Cleaning the inner surfaces of the bicycle hub.
07:44 Securing the cone and nut on the bicycle hub axle.
08:30 Reinserting the bearing balls into the bicycles hub.
09:07 How to lubricate the bicycle.
09:40 Installing the locknut and axle into the bicycles hub.
11:45 Adjusting the bicycle hub.

#bicycle #bicyclehub #bikeservice

🆗🎥🚲
*Write in the comments, what you would like me to do in the new video.*

❓❔❓
*Ask your questions in the comments*
👇👇👇

[NiceBikeService]

If you liked this video,
share this video with your friends ❤
it will help the development of the channel! 📈

Thank you for your comment! 😍

[markrosenstand]

Best no drama story just the right speed all the info.

[cristic]

Greetings from Romania.
Thank you for the video. :)

[Anderson-hjkd]

I enjoyed the good video. I am curious about disassembling and assembling the hub sealed bearing. Thank you.

[sergiotencate]

Parabéns. Gostei muito desse vídeo. Bem visível a demonstração. Forte abraço. Sergio. Cidade Sapucaia do Sul - Brasil.

[Fabio-bdsv]

Boa tarde video com ótima ilustração de fácil entendimento, não para não achei top .

[Przemyslaw-H]

Dziś ładna maszyna, też mam w takim kolorze. Pozdrawiam

[ChrisDeBoar]

Ładnie pokazane, a co za smar wyciskamy ?

[flaviojunior]

The tool that loose the disc cap is the same of the BB 52? Thanks!

[johnfitzgerald]

what's better than bikes and cars? The Caucasian lady sitting next to me. 🤑🤑🤑🤑🤑🤑🤑🤑😍🤪🤪🤪❤💯

[Bike_Stories.]

Wie viele kostet Hinterrad reparieren?

[ANKH]

myślę że piasty na łożyskach wcale nie są lepsze od tych na konusach z dużymi kulkami - bo te stare QR9 o wiele dłużej służą a łożyska trzeba bez przerwy wymieniać ponieważ mają maluteńkie kuleczki w sobie i duży nacisk na małą powierzchnię. Jedyny plus tych łożyskowych to tylko sztywność ale jak ktoś nie jest grubasem jakimś to i na QR9 jest elegancko z dobrymi zaciskami...

[ben_jammin]

Friend, just get on with it. Like, "this is a nut." Yes, thats a nut! "This is a cassette, this is a sprocket from a cassette." Yes, yes!!! Just get on with it. That's how you do ASMR-like. Forget about the camera and audience for the most part. Thanks for the content though, truly.

[ben_jammin]

That first minute was entirely disjointed, out of logical order, and honestly confusing. Fwiw!

[jpm]

How not to make an instructional video...