How to wash and lube rear bicycle derailleur. Bicycle maintenance.

This video tutorial is about how to maintain your bicycle.
It often happens that the rear derailleur on your road bike has difficulty changing gears.
This is all due to the fact that the bicycle derailleur requires maintenance.
I'm teaching you how to properly remove a bicycle derailleur, wash it and lubricate it.
The bike derailleur service will be of the highest quality and will consist of several stages.
This video tutorial will be useful for all cyclists, both road and mountain bike enthusiasts!
Enjoy watching my cyclist friends!

00:00 Bicycle derailleur requires maintenance.
00:38 How to remove bicycle derailleur.
01:20 Remove the rear derailleur.
01:52 Dismantling the rear derailleur into small parts.
04:18 How to clean bicycle derailleur.
07:13 How to wash bicycle derailleur.
07:54 How to dry a bicycle derailleur.
08:33 How to assemble a bicycle derailleur.
11:30 How to lube a bicycle rear derailleur.
12:11 How to install a derailleur on a bicycle.

Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈

[NiceBikeService]

Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤
it will help the development of the channel! 📈

[DWeeMaN]

Gotta give credit where it's due. This channel is a gem and you're doing quality work. Chapters, timestamps, camera work, no annoying music, raw sound, full process... Just chef's kiss.
A little feedback. It would be nice to know additional info about cleaning products: Is it degreaser? What type? Vinegar? Water? Isopropyl alcohol? What grease type? People don't know that certain grease can ruin your bike. How to deal with hard stuck dirt if you don't have an ultrasonic cleaner. What to do if you don't have X tool, etc, etc.
I know how to do most of service stuff and have the essential tools, but there's always begginners that start from scratch. There's thousands of "top 10 tips" about this but very few people do quality work as you do. Just giving you some ideas for future content.
Keep doing what you do! Thank you.

[RobertKwiatkowskiPL]

After dropping the derailleur body into the ultrasonic cleaner, it should be your duty to clean and apply new grease to the derailleur tension spring and the derailleur carriage spring.

[Bleach-Dubbed-Hindi]

What liquid sampoo use when you put in machine for cleaning?

[robertcabral]

Thanks for the informative video. In the past, I wouldn't take apart the derailleur to clean. Unfortunately, I learned the hard way, that my derailleur jockey gears would wear down, or stick. The cleaning and lubricating of them helped them last longer and the bike pedal easier. Thanks

[jaitonballa]

why no grease on the pulley wheels?? thats gonna be creaky after a sort ride.

[robappleby]

This video has convinced me to get an ultrasound cleaner.👍

[micky_avélo]

Toujours remarquablement bien fait ! Merci beaucoup de nous apprendre

[mathbluz]

I was hoping you would disassemble the parts where the springs are. I have a Claris rear derailleur similar to this one. And I'm wondering where the screw that holds the derailleur cage is. On the rear derailleur there is something that looks like a cover. Appears at 6:39 in the video, in the upper right corner of the screen. It has an oval shape. I think the screw is under that, but I'm not sure if it's actually a cover. Even though I didn't find what I was looking for, thank you for the video. I learn a lot from your videos. 😊

[larissamelo]

I love watching your videos, and it's so satisfying to see the difference in the end, how it was and how it looked after cleaning and maintaining the gearbox, keep making videos like this👏🏼🧰❤

[glen]

My Shimano M770 XT shadow derailer had sealed pulley wheel bearings. I bought this derailer in 2009, and i finally had to replace them two summers ago.

[wretchedworm]

Great vid. One question, because i am also changing my pulley. Is reapplication of Loctite not necessary?

[AhmedAdly]

Don't those jockey wheels have ball bearings inside that get stripped from grease?
Or am I thinking of something else?

[RayRomero-ncno]

What kind of ethanol does Da Shen use to clean oil stains?

[goombek]

Good work man. Just wondering about the lack of threadlocker on those blueish screws - shouldn't it be re-applied? Also those rusty bits could do with a makeover. Just my 2 cents

[florentg]

Salutation... Je viens de faire un peu de nettoyage de ma transmission mono 12 vitessse XT sur mon vtt, et en remontant les galets du derailleur arrière je me suis aperçu qu'il ne tourne pas dans le bon sens lorsqu'ils sont montés "écriture face extérieurs" du dérailleur. Le galet g est bien en haut et le p en bas.. on m'avait dit ecriture côté extérieur mais là je suis dans le flou... si vous avez des explications.. merci d'avance...

[onemorething]

I know you probably won't be able to help but it's worth asking. I just purchased a Specialized sirrius 6. After riding for a few weeks I wanted to start waxing my chain. I removed the chain and the wheel. The Rear Mech is a Scram Eagle GX. when I reinstalled the wheel the Jockey wheel now literally his the Cassette gears.. Scram has a little push lock that holds open the mech and if I release that lock, The jockey wheels will come all the way into the cassette gears. Just FYI I am taking the bike to a shop as I have no idea what happened. Just wanted some possible suggestions on I I did something wrong when I removed the rear wheel. Thanks

[michaelcirnu]

What’s the easiest way to know how to reassembly all the parts back?

[chosenfish]

Що за рідина для замочування і чим змастили наприкінці?

[alextatargta]

Дивлюся ваші відео - дуже подобається, як охайно робите. Але цього разу трохи не згоден з побаченим. Вимито/відчищено звісно бездоганно, але при цьому скоріше за все було і вимито консистентне мастило з пружини, яка лапку натягує. Я б ще додав маленьку крапельку консистентного мастила на вальниці роликів - коли свої велосипеди обслуговую, то так і роблю.