How to Change Motorcycle Clutch

[DesmoMarcel]

Make sure you notice the reference marks on the dry clutch plate and put back on in the same orientation, otherwise you’ll put it into 1st gear and go nowhere

[cuuhriz]

Clutches have always been intimidating to me but seeing this makes me think differently now. Thanks!

[lycanit]

This is one of those projects it seems much more intimidating than it actually is. I think the hardest part is actually figuring out what the torque specs are.

[Masophere]

Don't forget to warp the basket by unevenly tightening the bolts down with an impact 😅

[beeboop]

Good for you, that you have a dry clutch. but motorbikes who have a dry clutch take up about 20% or less on the market. if you have a wet clutch, you should consider, that you have to renew the clutch cover sealing and maybe drain and change the oil too. so your title is right. but only for dry clutches.

[Urmomcch]

Very helpful! I was actually tryna find a quick and easy video and you helped with that so much. Thx bro. I can finally start racing on my Ducati V4

[vilemaw]

Wear a mask bro because those clutch dust are pretty dangerous to inhale

[xelnjare]

You're fast becoming my favorite YT personality - thank you for sharing these, will let a lot of us get more involved in caring for our motorcycles!

[axax]

changing primary gear and what kind of tools needed ? can you make a video about that? i love how simple the way you explain this. thank you

[Dansk]

07 Zx10r owner here. Only had to do oil changes in the 8 years of ownership 😁

[berlnberln]

It might not be the case depending on your bike, but you need to pay attention to the orientation of the stamp steel.
One side of every disc is rough, you need to put them in the same orientation (usally rough edge facing the springs).

If not on tight tolerance basket(like japanese bike) the edge of the clutch plate will catch and get sideway, the springs won't be able to push enough to get it unstuck. It is especially true on dirt bikes, high horse power for a small engine, really tight tolerances.

[hotheadlooney]

That’s awesome I appreciate the help my clutch is starting to slip I was curious if I could change it myself thank you

[Turd_Runner]

Dont use magnets, the plates will become slightly magnetized and will attract every ferrous particle that passes near.

[GladiarOfDestruction]

Depending on what bike you have, your clutch kit will include extra clutch disc with varying thickness. You have to measure the stack height before just slapping it in. Refer to the service manual for the specs. I'm a stickler for shit being in spec versus slapping stuff together but I will if I have to

[ghostjayvanc]

I just bought Suzuki GSXF 750 2000., Thanks on this man🎉

[smallworld]

as someone who will never use this information and pretty much wasted my time watching it, i feel absolutely prepared to swap a engine into a street bike

[alexjackson]

Thanks bro you give out a lot of information far as bikes appreciate that

[JClaiborne]

I love you content. What’s the performance benefits to changing a clutch? Which on is better wet or dry?

[strokelover]

It might be easy but doing it correctly matters alot.😅

[shiloderi]

Is it importent which side of the plates to po put, or just put plates, disc,plates,disc....