How To Soldering Lithium Battery

How To Soldering Lithium Battery | Lithium Battery को Soldering कैसे करें | Life Hack | Viral Short | Creastar

Hello friends

We all know how difficult it is to solder a Li-ion battery but in this video we will see how we can do it very easily.

All the things needed are...

1. 3.7v Lithium Ion Battery
2. Soldering Iron
3. Soldering Lead
4. Soldering Paste
5. Knife

Thank You Very Much For Watching Our Video!

Related To This Video:

How To Soldering Lithium Battery
how to do soldering on lithium battery
how to do soldering on lithium ion battery
how to solder a lithium battery
how to soldering on lithium ion battery
soldering lithium ion batteries
soldering lithium battery terminals
how to weld lithium ion battery
how to solder lithium ion cell
how to soldering lithium ion battery
how to solder li ion battery
how to weld lithium batteries
how to solder 18650 li-ion batteries
how to connect a lithium battery
how to wire rechargeable batteries
lithium ion battery connection
how to connect wires on battery
how to connect a battery to a wire
lithium ion battery life hacks
lithium battery life hacks
18650 battery life hack
3.7 volt battery life hacks
lithium battery
lithium battery cell

#creative #diy #battery #homemade #dc #gadgets

[survival_man]

You may overheat the battery by directly soldering on it be very careful or don't do it

[xConundrumx]

Or you do it the right way and use a battery holder or if you really must spot weld nickel soldering tabs to the battery.

[Himmelgrau]

It's best to use a spot welder for this. The solder iron can cause damage. Spot welders can be purchased online and are relatively cheap.

[dattatrayalimaye]

Just apply a swab of Harpic.no need to scrape.
I always do this way with amazing success

[ДмитрийЛяшенко-лп]

Паяльная кислота и мощный паяльник . Короткое прикосновение, и, готово. Затем место пайки промыть водой и высушить.

[Telemeadas]

Lemon and Salty Solution for solder tin to another metal

[briankoh]

Use hydrogen chloride..its usually found in floor cleaners..dip ur soldering wire into the solution then solder it to whichever metal surface u want..

[jjjohn]

Use solder which contains paste already....no need to apply paste separately

[GF-mfml]

Don't use knife, use foor outside.

[denissavgir]

You are teaching people to destroy their batteries. I am a total soldering noob and even I know that heat destroys lithium batteries. Do NOT solder lithium batteries. Ever.
The proper method is to use a spot welder to weld nickel strip onto the battery. That minimizes the heat damage to the battery

[michelwisard]

Eso no se suelda amigo mio. Es peligrosa esa practica. Se debe de usar una soldadora de punto para ello.

[lowlifetype]

I have never been able to solder on batteries.I can only solder cables between them.

[Nice_Gaming]

You dont need to stratch if you're using flux

[absm_SANTO]

There is no 3800mAh battery if it is of the 18650 type, such a battery is FAKE !! ... ☝️😉

[rabikanthansdah]

Why my solder not holding useing trick of your
I using 25w soldering iron

[Executivecomforthomes]

In short you have just shown us how to kill a sodium battery

[bhoot]

Use proper flux for the job. This flux is only good for copper and gold

[dr.sorbonne]

You spend too much time with the soldering iron tip on the battery, which can destroy the battery and is very dangerous. You should first solder the wire, then the pole, and connect the two while keeping the iron on the battery for as little time as possible to avoid overheating it

[balkanboi]

trick question: you dont solder, you spot weld

[kritikalazz]

File it with a file or sandpaper takes seconds