How to Replace Front Brake Hoses 2008-2010 Ford F-250 Super Duty

Показать описание

Buy Now!

This video shows you how to install new front brake hoses from TRQ on your 2008-2010 Ford F-250 Super Duty. A leaking brake hose is bad news! Losing fluid, or getting air in the system can cause the brakes to weaken or fail completely. Old, dry rotted, cracking, or bulging lines are on the verge of breaking and starting a leak.

Estimated installation time for a professional technician is approximately: 1 hour 18 minutes

This repair was done on a 2008 Ford F-250 Super Duty XL 5.4L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• 11mm Flare Wrench
• 21mm Socket
• Crimper
• Pliers
• 3/8 Inch Wrench
• Brake Fluid
• Brake Parts Cleaner
• Rust Penetrant
• Safety Glasses
• Assistant
• Drain Pan
• Hammer
• Wheel Chocks

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.