How to Connect a C-Wire Adapter to Your Amazon Smart Thermostat

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

I couldn't get it working with just C and K. I tested C and R and got 24 V so figured that the C-wire adapter gave me four wires out, my thermostat has slots for those four wires, CRWK, may as well connect them all 😀

Everything is working fine now 😀 In hindsight it's a short and easy run, I should've just ran another wire down to forego the C-wire adapter but meh, it's working, this guide at least helped me feel more comfy.

Thanks!

cimmeriian
Автор

So I can run a new five-wire by using the old cable to fish in if I don't want to get a C adapter?

samsen
Автор

Hi, can i just use one c wire adapter to connect multiple smart thermostats, one for each floor in the house?

bubbudubbu
Автор

It’s all fun and games until your furnace doesn’t have a mother board…

SAUCE
Автор

Does this work if I were to plug in the four wires in the wall next to the actual thermostat to the adapter, instead of going all the way to the furnace to connect it?

FutureAIDev
Автор

if i remove the O wire to place it on the W located on the c box. do i then place the C-wire adapter to the main box to W or to the O spot?

elyseefortune
Автор

Can I connect the c adapter to the unit condenser outside

OnTheGoKRO
Автор

My existing thermostat only has red, blue, and white connected. The yellow and green wires are there, but not connected to the existing thermostat. Should I connect these to my amazon thermostat?

danwhitman
Автор

how do you connect the c adapter if you only have 2 wires in the thermostat? white and red? where the hell do you connect yellow and red to in the c adapter and its wires to where and same with at the thermostat? super confusing. heat only system

nckcastello
Автор

Trying to be simplistic only works if everything is as you think it should be. It would be understandable better if you explained the PURPOSE of each wire.

MrReadandlearn
Автор

Do i still need connect R and W wire to a R and w? Or leave them unconnected ? This is a little confusing

alexlianghu
Автор

If I am only connecting my smart thermostat to my central air unit bc my heater has its in thermostat do I have to connect the c adapter directly to the air conditioner?

samanthasullivan
Автор

My air conditioner don't have a y labeled wire how I has an F label

Technicist
Автор

So you don’t have to connect the white and red wires to the thermostat end? I feel like I’m. It gonna get an answer😔

MosesJesusElijah
Автор

The end of the video does not make sense to myself and apparently many others who have commented. It stays to only connect 2 wires of the 4 you started with. Please pin a comment to the top of the comment thread, that has the proper instructions for the last steps of connecting wires.

carldrew
Автор

So I don’t need to connect the BLUE wire at the thermostat???

johnhoneyblue
Автор

How if I don't move the Y wire to the K terminal, and let it stay on Y, will the unit still working properly?

sugarman
Автор

So they went with HONEYWELL. Interesting.

tdata
Автор

my current thermostat only has y, w, r, and rc. what do i do without a g wire?

panikk