HOW TO CLEAR ERROR CODES ON RISO COPYPRINTER HIGHLY SPEED #riso ERROR T98-006 #howto #printer

1. The drums can not be manual released on a MZ due to the fact they are motorized for positioning.
2. T98-006 code is "FRAM checksum error", it's possible the power failure may have damaged a board. Was the unit surge protected?
3. Have you tried: turning off the unit, hold the yellow reset button down while turning it back on and holding for few seconds? *number one Riso error code reset procedure*

Let me know how that works.

[onglee]

do you have any idea why riso sfc5130 keep code D05-210 which is master detector sensor already replace a sensor. any advise might help thanks

[matt.]

The error I constantly get is “Call service”.
How do I fix this?

[abongoleeatukiya]

Please help me fix RISO SF 5030 ERROR A06-403

[dagimdebela]

Please Help Me RISO SF 5030 ERROR T98-006 TEST MODE IS 130

[sushilsinghai]

Please Help Me to solve the Error in RISO SF 5030 ERROR T98-934

[emmanuelmicheni]

My riso is not responding to cartridges, what is the problem

[johnjosiah]

Please Help Me sulve this error on my RISO SF 5030 ERROR code T98-006

[leonardomesa]

Hey hello, i have a question, i was working with my MZ1070 and suddenly it turned it off, i set on the switch again and there is this booting message appearing but nothing happens... any aide of what could happen? thnks