How To Restore Setup Mode on HP Deskjet 2600 All-In-One Printer Series, review.

Learn how to restore setup mode on HP Printer 2600 all-in-one series.
Follow these steps to restore setup mode on HP Deskjet 2600 All-in-one Printer series:
- With the printer on, press and release the Cancel button to wake the printer.
- With the printer in a ready state, press and hold the Wireless and Cancel buttons at the same time for three to five seconds.
- The default wireless settings are restored, and the printer is placed in setup mode when the power button light and blue wireless light start blinking.
- If its been more than two hours since performing the reset, you must perform these steps again to place the printer back into setup mode.
This tutorial applies to HP DeskJet 2620, 2621, 2622, 2623, 2624, 2630, 2631, 2632, 2633, 2634, 2635, 2636, 2640, 2652, 2655, 2680 All-In-One Printer & HP DeskJet Ink Advantage 2675, 2676, 2677, 2678 All-In-One Printer.

Welcome To My Youtube Channel - Copy Print Scan

[hollyafitzgerald]

Thank you, thank you, thank you!!! I've been losing my mind trying to get this printer to connect with the new WiFi, HP support is useless. This is so simple and I had it reset in 2 minutes, amazing!

[AmbroseB]

Absolutely brilliant and straight to the point! Struggled for hours to connect my 2600 to new wifi, so called 'expert' sites giving complex advice, one even said to buy a new printer! Followed your method and got it working in 90 seconds - thank you so much 👍👍☺️

[lisaannemeredith]

OMG, thank you so much!! I was going crazy trying to get it to into setup mode. This worked perfectly!!

[dmomtown]

I spent an hour troubleshooting and it finally works just watching and doing this!!!!

[jaydensimmons]

It has been used several times and loved.

[OGThostrup]

Thank you so much. Have been struggeling for ages trying to connect my hp to my new network.

[lorenalopez]

Thank you!! I’ve been fighting my printer for a week now and this did the trick

[shanaw]

A lifeeee saver lol. I’ve been fooling around with this printer for 3 days and came upon this video. In 5 mins my stuff was connected lol

[alyssazen]

This was super helpful! You saved the day! I saved so much time and frustration

[shelbywalesby]

Thank you, this helped me out a lot!!!! Something so simple isn’t common knowledge

[howlingc]

Excellent video! Thank you! This solved my problem.

[soniaoberoi]

How to connect it to the device should have shown that too...i am struggling to reconnect it to wireless connection

[anulkabar]

Thank you! You heped to save my sanity! :)

[rileylouiscorpuz]

Wow! Thank you for this. Successful with the printing. But after that, blinking light again. Cannot recognized the black catridge. What should I do? Please help.

[xneezogor]

Hello, what should I do if the on/off light button does not blink? Reset doesn't seem to be working :( thanks

[ronraffignone]

I have a flashing orange light by color cartridge. I have changed both as this happened right after changing black ink. I printed and ever since this light blinks. Have reset device it prints but goes back to flashing

[Alejandra-mv]

Thank you thank you so much this was so helpful!

[Godiscloserthanever]

How do you connect it to your device for printing? Someone please help me and THANK YOU❤

[ambarmaryono]

hey can you help me, my indicator ink level printer 2623 is not detected, whereas i have to refill my cardrige. thanks you so much 🙏

[abarge]

What do i do if none of the buttons are responsive?