DIY lost wax vacuum canister to add vacuum while pouring metal

preview_player
Показать описание
Simple and cheap way to add vacuum while pouring aluminum, brass, etc.
  1. Crooked Fart Crafts
  2. lost wax
  3. casting
  4. vacuum canister
Рекомендации по теме
DIY lost wax 0:04:00

DIY lost wax vacuum canister to add vacuum while pouring metal

DIY Vacuum Casting 0:12:52

DIY Vacuum Casting Set up / Build.

Experiment With Lost 0:03:48

Experiment With Lost Wax Casting - Investment Casting

casting with a 0:01:19

casting with a vacuum machine

Improving Solid Flask 0:04:07

Improving Solid Flask Vacuum - Straw Technique - Lost Wax / PLA Casting Tips

DIY Vacuum Casting 0:06:27

DIY Vacuum Casting Set-up/Build, Modified.

DIY | Casting 0:14:52

DIY | Casting Vacuum Chamber

How to make 0:04:33

How to make simple Vacuum Chamber in FAST WAY

SIMPLE homemade WAX 0:04:10

SIMPLE homemade WAX INJECTOR for lost wax casting - by VOGMAN

Mixing Investment for 0:09:32

Mixing Investment for Lost Wax Casting

Vacuum Casting a 0:01:08

Vacuum Casting a 14kt Gold custom piece

Building my first 0:09:44

Building my first vacuum casting table

Wax Injection Makes 0:05:16

Wax Injection Makes Easy Multiples

Jewelry Casting 0:03:10

Jewelry Casting

Handyman's Don't Want 0:05:00

Handyman's Don't Want You To Know This! Tips & Hacks That Work Extremely Well

Building A Shelf 0:14:57

Building A Shelf For A Battery Hand Held Vacuum

Disrespectful Iguana Femoral 0:00:40

Disrespectful Iguana Femoral Pore Popping Video

Very resourceful GIRL 0:00:24

Very resourceful GIRL 🤯 #camping #survival #bushcraft #outdoors

Super Glue and 0:06:02

Super Glue and Baking soda! Pour Glue on Baking soda and Amaze With Results

SURFER GETS SUCKED 0:00:20

SURFER GETS SUCKED INTO STORM DRAIN #shorts

DIY Jewelry Casting 0:29:18

DIY Jewelry Casting Vacuum Chamber better than factory

When your Asian 0:00:29

When your Asian spouse influences your toilet habits

Found Cancer in 0:00:27

Found Cancer in my Chicken Meat 🐔 #Shorts

Sand Casting an 0:19:21

Sand Casting an Aluminium Vacuum Cracker for Jars

Комментарии
Автор

Good to see the inventive spirit alive. You’ll want to add a valve at the top of the vac pump as once turned off that bubbling sound is the vacuum pulling the oil out of the unit. Will probably only contaminate your hose, but you’re losing vacuum and I suppose it could introduce an oil mist into a chamber with a hot pour. Shut the valve with the pump running, then shut off the pump. Take care and have fun!

frederickwhite
Автор

Nice! May I ask, how do you lower your flask? It seemed a little rough...

jao
Автор

Does the 4 cfm pump do a good enough job on your castings? I read it needs to be 7 cfm to 9cfm

stopmotionman
Автор

Is it possible that plaster mold breaks and pump sucks metal in?

juho
Автор

How did this end up working out, I'm looking to do a similar setup? Does the gasket hold up to the heat? How hot do you heat your flask before dropping it in there?

DjPelland
Автор

How is your pump handling the the heated air? (500 celcius)

awarebware
Автор

Anyone know where I would find a pipe like this ?

chrissilliker