Create-A-Bed® Deluxe Horizontal Murphy Bed Construction, Assembly & Installation Video

Create-A-Bed® Deluxe Horizontal Murphy Bed Kit. Build your own Murphy Bed or Wall Bed with this easy to use kit and instructions.

CHAPTERS
0:00 Introduction
0:01 Create-A-Bed® murphy bed mechanism
1:34 Unpacking the Kit
3:15 Jig Saw or Coping Saw Philips Head Screwdriver
3:27 Hammer Clamps Straight Edge or Framing Square
3:30 Household Iron Utility Knife
3:33 Buying the Materials
4:22 Identify Components of Bed
5:00 Cutting the Wooden Components
5:37 Construction of Inner Wood Bed Frame
7:43 Preparing the Side Rails
8:00 Not using PLYWOOD for Parts B Side Rails VOIDS WARRANTY
8:11 Marking & Drilling the Tubular Leg Mounting Holes
14:02 Attaching the Leg Support Rail
14:53 Marking & Drilling the One-Inch Pivot Holes
15:23 Placement of Metal Components Varies with Bed Size
16:40 Mounting the Lower Ball Stud Plates
21:05 Mounting the Female Pivot Plates
23:03 Attaching the Foot and Head Rail to the Inner Wood Bed Frame
25:18 Attaching the Left and Right Side Rails to the Inner Wood Bed Frame
29:05 Preparing the Face Panels
29:28 Mounting the Face Panels to the Bed Frame
34:46 Cabinet Verticals: Mounting the Bed Stops
35:57 Cabinet Verticals: Mounting the Upper Ball Stud Plate
37:49 Cabinet Verticals: Mounting the Male Pivot Plate
43:07 Preparing the Headboard
43:21 Assembling the Header
48:26 Sanding and Finishing Your Bed
49:18 Assembly and Installation Instructions
50:21 Tape Measure Philips Head Screwdriver
50:24 Flat Head Screwdriver #4 Allen Wrench
51:08 Installing the Plywood Mattress Supports
52:44 Assembly Instructions
57:43 Cannot Easily Snap On Gas Springs?
58:32 Follow Instructions for Removal of Gas Springs
59:49 Anchoring to WOOD STUD Construction