An Altmill CNC Introduction & Review!

In this video we Talk about the new #ALTMILL #CNC from @SienciLabs!

ORDER YOUR ALTMILL HERE:
ORDER YOUR SPINDLE HERE:
ASSEMBLY INSTRUCTIONS FOR THE ALTMILL:

There is no setup or “how to” instruction in this video! ONLY my Take on this incredible CNC! 30 minutes may seem like a long time but, if you are on the fence about whether to order your own #Altmillcnc then this might be 30 minutes that will help you decide if the #Altmill is right for you! Thank you for watching to the end!
Be sure to share your thoughts with us in the comments below!
And, don’t forget to “Like” and “Subscribe” so you don’t miss any future content. Thank you all for your continued support of this channel!
Be sure to also follow for updates on the DUST HOSE BRACKET. I hope to offer it soon!
Links to Products in this Video:

Also on this Channel:
We use #vcarvepro
to create unique designs and gSender
to steer our CNC’s.

ORDER the Standard Touch Block here:
ORDER your Longmill MK2 OR 48” EXT Here:
ORDER The AutoZero Here:
Learn more about the AutoZero Here:
ORDER your Router Here: Makita RTO701C Set at #3 speed
ORDER your Router Bits Here:
ORDER YOUR Montana Brand self centering drill bit Here:
Order your Laser Module Here:

FIND US ON Facebook:
@BuckyGivesADam
FIND US ON Instagram:

[ppouncey]

Thank you for the walkthrough. I’m really interested in the hose bracket. That’s good thinking 🧐

[garygraham]

Very good explanation of the Altmill setup.

[DustyWoodcutter]

Great advice to any new AltMill owners. AltMill is a pretty advanced machine. The research you do now will make life easier when you start your AltMill journey.

[garygraham]

Interested in the dust collector setup. Thank You

[AndyV]

I enjoyed your video review. Thank you for taking the time and sharing your set up. You put in a lot of hard work into the build and it shows.
I'm very interested in getting the dust hose holder for on top the spindle you have made and thanks for sharing the links for the pc, monitor and mount.

[michaelgmyers]

Great video
Should get mine in early October. You lucky first 50 should be required to make videos every day for those of us counting the days down. Thanks again for all you do.

[DustyWoodcutter]

Thanks, great video, great ideas. Appreciate your sharing. I am a brother of the 1st 50. I had hella trouble with the g sender config. Made 2 awsome projects. Love the AltMill. Fired it up the next day, wouldnt home. Started working with Jason, he left on vacation. Daniel stepped in to help and my E Stop button died. New one wont arrive till next week. In spite of all that. I am stoked that we, Brother AltMill owners, own a point in CNC history that will be remembered. Thanks again for all the sugestions and sharing. Great job. Rex Templeton aka Wood Cutter @ IDC live stream wednesdays. Peace Out

[StephenGrant-nodz]

Great video! I would love one of those hose brackets!

[dennisbracci]

Third time watching. You have some great ideas and an awesome shop. Look forward to watch more of your videos . Thanks again for sharing.

[Dugsin]

Thanks for the update. Maybe one day, just don’t know if I need to speed things up in the shop.

[dennisbracci]

Thank you for the awesome video. Altmill is my choice just waiting for funds. Thanks again.

[ApexWoodworks]

Bucky, terrific video! I'm on the waiting list for my AltMill's delivery sometime later this month or the next.
A few comments:
1. Why didn't you hang your hose directly over the centre of your spoilboard instead of off to the side?
2. As regards laptops in the shop, all I've ever done is cover their inlet ports with gauze, taped along the edges. Easy, peasy!
3. On a separate note, you're absolutely right that a 4" dust boot, if connected properly to a 4" flex hose, will work very well... assuming you've got it connected to an adequate dust collection system. I'm going to connect my AltMill to my shop's Oneida Air Systems central cyclone dust collection and know that it'll be far superior to anything I've experienced with my Longmill Mk1 (which I've already sold)

[randywoodworking]

Awesome video. I can't wait to get mine in sept. I have never operated a cnc. Or to be completely honest even a computer. So yeah can't get any fresher to the cnc world as I am. Iv been watching every video I can on competes. Vector v carve and on the altmill as I can find and it is all confusing. But I will not give up. I have a buddy that Is trying his best to teach me. Thankfully he has patience. Keep your fingers crossed for me that I can figure it out. Sept will be here not soon enough

[billstauffer]

Bucky, thanks for your honest review of this impressive machine. I like the drawers for stability.

[JNewellworks]

Great video Dana! Look forward to mine in October and very interested in the mount for the dust collection. Thanks for sharing.

[MiterTrimCarpentry]

It’s always nice to hear from you Buckey!! The touch monitor running G sender is a remote monitor from your PC or is the monitor running Windows?

[Bcam]

I am interested in the hose bracket. Can you do a video on how to load gsender on the mini computer?

[geegonzalez]

great video bucky, mine will be here in oct my first cnc...

[NWGR]

I really, really wish sienci would release a 2'x4' version of the altmill. I'd buy one right away. I only have about 2/3 of a one car garage to use as space so getting a 4'x4' in there would mean getting rid of my tablesaw.

[michaeljakus]

Have you ever had any hands on with the oneinfinity elite, I will not be receiving my Altmill until Dec. I love my longmill 30x30 but have a few jobs coming up that require more space (48x48). At first I thought I could wait it out but not sure I can. I love everything about Siencilabs but might have to go in another direction. If you could let me know if you have had any experience with One infinity it would be greatly appreciated.