Repair washing machine suspension rods FREE and FAST. See description.

If this video is helpful , please click that thumbs up.

(The grease is a good idea. In fact they come factory greased. If you see no grease in yours it is because it is dryed out and that is one add on to the problem. If your sponge is too dryed out, it canot be saved. In fact the sponge will split once you slice it. It will just crack. The grease keeps the sponge from drying out and cracking. The grease also helps the tension to be smooth and keeps the sliding from jerking or hanging up. Therefore you put grease throughout the foam.
The foam as a whole does not move on the rod but stays in the housing/cradle. Just where the rubber goes is where the sliding happens; of course.
Also if the cap somewhat does not seem to snap back in place tightly. Don't worry about that part. The cap will stay put by the weight of the tub.

I will also make a video how to fix the struts on front load washing machines.....look for it..

[amtoat]

Thank you! My washer machine has been moving around my laundry room since it was new. It was getting bad and my husband found your video. Your fix work!!! We appreciate you!!

[lsideuh]

WOW!!! You just saved me $1000, that’s what the technician wanted to just replace 4 spring brackets in my Midea washer. I was charged over $250 just to get what was stuck in my Midea dryer. Thank you

[Dlee]

As I was in the process of doing this I thought it would never work. Washing machine is now spinning perfectly!!! Thank you sir!!!

[joeherder]

To all the naysayers if it doesn't look like it will work its easy don't try it...but I'm here to tell you it does work! Many thanks to the author

[richardball]

You're the first person who explained what the real problem was. The felt was not providing enough friction to resist the bouncing. I used a peice of rubber hose first, 3/8" long, 3/16" I.D. then the original felt then Squeezed the cover back down. Reinstalled rods. Spins quiet now. I'm thinking the weight of the loaded tub puts added pressure on the felt squeezing it against the shaft and reducing the bouncing. Thanks for the tip.

[joshthompson]

THIS ABSOLUTELY WORKS! Do it exactly like he says and your back in business. Brilliance, thank you!

[muchos_tacos]

Great video. You saved me from buying a new machine. It may not last for long but so far it is still going. I did not cut the foam. I just slide two pieces of zip ties in each rod. Thank you again.

[HVACENGINEER]

The moment I saw your hands I knew you had a solution to the problem we all face in the service field
You gotta know I’m gonna try this out
looks like transmission coolant hose your using
There are different types or thickness of rubber too that can be experimented with but clearly the grease is also vital to slow the dampening which is the problem, not the springs!!
Thank you good sir, I hope it works

[azamshamshudeen]

From trinidad I was going to buy a set of rods but I did what you do and it's work thank you sir have a good day. A.g.g

[cocotower]

"my rubber came off".... why Junior was born. :) :) :)

[dporrasxtremeLS]

This Video was GREAT!!! Saved me from buying New bad suspension rods! I checked your other videos as Well! WOW!!! Great Channel! Subscribed! Keep up the Great work and help you Give us on YouTube!

[danetilley]

Thank you so very much, sir 🙏. This video was to the point, with accurate and helpful information. Great display of good ol' ingenuity and good ol' neighborly generosity. Your dog in the background was making me laugh, as well as your awesome display of patience with the white cap kept sliding down, being a nuisance and getting all in the way. HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA. 😂 Sir, senserioly thank you for taking the time outta your day to make this video as it helped me immensely. I spent 3-4 days jacking with my washer trying to balance it and try redistributeing loads, trying all sorts of ways to make it work, and then finally looked ot up and spent another 2 hours and 10 or 12 videos later I was about to start ordering parts the saw your video and spent 5 minutes watching it and another 30-45 min fixing my suspension rods and my washers like you video made all the difference in the world, Thank you, sir.

[imacrazy]

I like this Gentleman doing the video, very crafty to say the least!

[dadsgarage]

Thank you buddy for saving a skilled poor person

[mikhailfong]

It is Jan 2023. I bet it is still cold out there. Finally found an effective and simple way to fix this problem. Thanks, mate...a zillion thanks. I am thinking of using the rubber from a bicycle tyre tube because I have a bunch of them saved. Thanks again from Malaysia.

[lasanascott]

Hey I tried this method and it really worked. Thanks for the assistance of your video

[rtjap]

hi, great video, after seeing this I held off buying a new set of suspension rods. I left the old ones in and used BELT GRIP from crc products. Sprayed onto the rods where they go into the spring with a full load in the washer to get maximum spring compression and exposing as much rod as possible. Works a treat, the friction from the belt grip is perfect and i expect to get a lot of extra use out of the rods. Thanks for the idea.

[muchos_tacos]

NOTE. it is almost a year and the washer is still working well. So. This repair works.

[rd]

I like when you think of a way of fixing something in your mind, then you find a video on it. Thanks for your video

[PhilipBrowne-nr]

I watched a couple videos and I liked your video the best. I have confidence your method is great.