Plug a Hole w/ Tubeless Tire Repair Kit - Available at J&P Cycles

J&P Cycles® Tubeless Tire Repair Kit
• Basic kit contains all of the basic items to make an emergency roadside repair
• Kit contains two tools, plugs, adhesive and CO2 to reinflate tire
• Comes in a nylon pouch for easy storage

J&P Cycles
Shop the World's Largest Aftermarket Motorcycle Parts and Accessories Superstore!

If you liked this video, subscribe to our YouTube channel and follow J&P Cycles on Facebook, Twitter, Instagram, Google+ and Pinterest.

[WaitWhatsMyName]

Lube it up, Ream the hole, then pull out....good advice for more than just tires

[mohammedrahman]

Props to you guys for not editing the video to show that one canister would do the job. Respect!

[rickswindell]

Get everything ready before you remove the screw

[paulchilds]

I have used them 4 different times and they lasted the life of the tyre. Never had one fail on my R1.

[marcv]

I've had it 3 times, 2 times for the motorcycle and 1 time for the car, both times drove until the tires were worn, so it is a permanent solution in my eyes

[harleydavidson]

I do this every bloody week on my machines (I’ve got earthmoving equipment), have to say don’t put lube onto the cord only onto the reemer tool and they should of given special cement to put onto the cord. When you insert the cord always turn it clockwise once or even twice to twist the inside and then pull it out making it harder for the cord to ever come loose

[alexrizzo]

Really clear and well illustrated, great job guys

[mikeskidmore]

I have plugged heavy truck tires. Always let all the air out first. at 110 PSI The plugs never held up very well. I always put a tire patch on the inside of the tire and the plug just kept debris from getting into the injury hole, Nice Kit they do make portable air pumps too.

[harryohanson]

I recommend putting a twist-valve or something between the CO2 canister and valve stem

[jpvreeland]

Wish I had found this 10 days ago before I got a flat.... but now I'll be prepared for the next one.

[phillipmarlow]

You guys are awesome. Seeing it done is so much easier to understand than reading. . Thanks again.

[desertfox]

During the process you lost more air for not being ready 1st get your plug ready then rough the hole 2nd the canister and the hose

[adrianjohnson]

Thanks for the demo; certainly easier than trying to decipher the instructions provided.

[ianmangham]

Always have everything ready and to hand before removing the object.

[davidroberts]

If you carry this kit on your bike like I do, check the glue tube every few months as the glue goes hard in the tube from heat. You can buy glue from auto stores.

[-tj]

Cut the music! Useful tip about not letting the tyre deflate totally. Thumbs up!

[loknlode]

Brand new tire with less than a couple hundred miles on it. Plugged it, rode it for the life of the tire.

[familyfirst]

Thank you chief, very well presented, appreciate it ❤👍🙏

[rayok]

Thanks ! followed this and worked great for me. Rear tyre with 1500 miles on it.

[fineartukulele]

Ok, thanks for the video. I did repair a car tire with it . A screw punched in it. It worked out fine. Now I'll take it on my vespa in case of :)😀