Three Loop Bowline

THREE LOOP BOWLINE: (Class 4, Special Knot):

Purpose: To form three fixed loops in a rope. Normally used as an anchor knot.

Tying the Knot:

Step 1: Form a bight in the middle of the rope. Bring the bight around the anchor point from right to left. Make a round turn around the anchor point if the anchor point is less than 3” in
diameter.

Step 2: With your right thumb facing towards you, form a double loop in the standing part by turning your wrist clockwise. Lay the loops to the right.

Step 3: With your right hand, reach down through the loop and pull up a double bight from the standing part of the rope. Ensure that the standing parts are towards you.

Step 4: Place the running end (bight) of the rope through the doubled bight from left to right and bring it back onto itself. Hold the running end loosely, dress the knot down by pulling on the
standing part.

Step 5: Safety the knot with a doubled overhand knot.

Checkpoints:

-Two bights around the standing ends, held in place by two loops.

-The running end of the bight is on the inside of two fixed loops.

-Minimum 4” pigtail after the double overhand knot.

[slspence]

Can you please add a video for how to tie the bowline on a coil?