VW or Audi Check Engine Light 101 and How to Erase It

preview_player
Показать описание
In this video we talk about repairing the check engine light on your VW or Audi model. This includes the basics like what does a check engine light mean and how do i erase my check engine light.

Take a look inside to help you understand what you need to do for your VW or Audi to take care of the check engine light.

OBDeleven VW and Audi Scan Tool HERE

Our Video on how to Diagnose Misfires

Shop for VW and Audi Parts Here
----------------------------------------------------
VW AUDI Specialty Repair Cornelius NC

VW AUDI Specialty Repair Kent Ohio
----------------------------------------------------
More info on DAP Reward Credit
Рекомендации по теме
Комментарии
Автор

Next Gen - OBDeleven VW and Audi Scan Tool HERE

Older Android Style OBDeleven Pro Scan Tool

Deutscheautoparts
Автор

The real bummer... you did not cover the procedure to do a erase as your title indicates. You cleared your codes.

pauliekruger
Автор

Are you doing a video for diy people or for mechanics that are already in the field yeah let me go get my android tablet and use this special software the high level techs use🤦🏽‍♂️

edwinrijos
Автор

Thank you so much for your short comment on the 2.5 engine issues about topping off gas tank too much!!!! I did that all the time and that was causing a very intermittent but quite worry some engine shutoff & buck on in my 2013 golf, 2.5.
Honestly that may have saved me from seriously considering a new car, I say that because I knew it would be an endless rabbit hole of cost, time and frustration having a shop or dealer 'trying' to fix the issue.

I stopped squeezing that extra .5 gallons of gas in each fill up, replaced the N80 valve from Deutsche Auto Part and no check engine light and not a buck since!!!

Again thanks for your videos and sharing your knowledge. I NEVER would have put topping off the tank with an engine buck together.

mattemenheiser
Автор

Well if I didn't drive my vw everytime it gets a check engine light on it would never leave the

italatin
Автор

Ok, here’s a few things to potentially save you hundreds of dollars. Before you take your car in, buy a $60 scan tool and read the codes. Mine said “air fuel ratio imbalance”. I disagree that if the yellow engine light comes on, you should not drive the vehicle. Here’s why. This happened to both my 2012 A7 and 2015 Q3 - the yellow check engine light came on and I, wait for it………..first, removed the gas cap, pushed the rubber around the filler tube down hard away from the filler neck, checked the gas cap gasket and gas filler tube for dirt and cleaned the surfaces. Secondly, pull the oil cap and check for debris. Yes, you’ll find plenty of dirt and grime around there - clean the oil filler area and pull the rubber gasket off the oil cap, clean it with solvent, turn it over and replace the oil cap. Use a diagnostic tool you used to check the codes and erase the codes. Turn the car off and then on again and I’ll wait for you to respond to this post that it worked! It did for me……Good luck!

evadmcgillicuty
Автор

Man ima drive my mk 5 gti into a tree i have new problems every month im gonna end this once and for all

longdongsilver
Автор

Interesting...My EPC and check engine light came on same time. The car went into "limp" mode. I turned off the car waited and then turned it back on. The check engine light came back on but the EPC light stayed on. I put my scanner to see the codes. Scanner said cylinder#2. Now could this be a coil pack issue. Please advise. Great videos and wealth of information.

stevegwilliams
Автор

Good information. where does the scan hook up to under the dash?

mikemccormick
Автор

We just bought a 2019 Volkswagen Passat 2.0t Wolfsburg Edition, I noticed that the service engine light was on. Is there any way I can get the codes with a code reader, I mean I have one that you'd hook up to the car under the steering wheel, can I use that code reader on this car? It is a push button start car

joebourke
Автор

My check engine light came on after my battery had drained does this mean there was a miss fire when I tried to start it when the battery was dead?

NoRRyRaMpaGe
Автор

Thank you for explaining this to me ;) great delivery of content ;)

aishaadam
Автор

I have no check engine lights on but obdeleven shows I have 3 codes one is engine the other is the transmission and the other is the heater seats

robojohn
Автор

Great vid. Dude please tell me what tablet is that?, very nice, I need to go get one.

sNstRflyEr
Автор

I just barely got a check engine light for my Audi TT Mk1 and I didn’t think much of it, since my car seemed to be running fine, but when I started it up later on, the idle was very rough which it hadn’t ever done before. Any ideas what that could mean? The light isn’t flashing but it’s on

ashmyblunt
Автор

well that was 4 mins I'll never get back

mattdroze
Автор

My 2016 vw jetta se tsi has push button starter with break & a solid check engine light on but, problem with obd II scan to clear code on p2263 turbo reads “fail” & turn car off/to start position then; press any key to clear codes. What is start position? When I try to clear the codes, I hear a clicking sound under the hood.

proscentgifts
Автор

i have replaced twice my temperature sender but after a week or so, it stoped working. any guess why? can this be caused by any of faults stored in the ECU? Pls help

vikasmisra
Автор

Do you know if VW trouble codes are recorded by the vehicle ?

eddievantailn
Автор

I too my car in and I was told they could not replicate the issues the codes pointed to and the light went away but now it’s back? 🤷🏽‍♀️ any suggestions?

luciamorales