How to Fix LG Top Load Washer Not Agitating! | Model# WT7200CW | #LG #ApplianceRepair

In This Video, We have an LG Top Load Washer Model # WT7200CW. Complaint Was that it was not Agitating, hence Not Washing the Clothes. If you are Having this Same Problem, Make SUre to Watch the Video To See How to Repair it Yourself!

Please Like this Video, Share and Subscribe for Future DIY Videos. Support Our Channel by Using the Affiliate Links Below. (By Using them, We do Earn a Small Commission at NO Extra Expense to You) If You Can, You may Also Leave a Tip Below. Thanks For Watching and for the Support.

Washplate:

If this Video Helped you in any way, Consider Leaving a Tip:
- PayPal: @diyrepairsnow
- Venmo: @diyrepairsnow

Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk.

More Videos to Watch!

My Filming Equipment:

Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!

- DIY Repairs Now

* Disclaimer: Links May Be Affiliate, Which Means by Using them We do Get a SMall Commission. This Way, You Support the Channel at NO Extra Expense to You! Thank You For the Support!

#appliancerepair #appliance #appliances #kitchenappliances #homeappliances #repair #dishwasher #kitchen #refrigerator #home #fridge #refrigeratorrepair #oven #washerrepair #homeappliance #authorized #washingmachine #dryer #ovenrepair #service #stove #freezerrepair #dishwasherrepair #maintenance #washer #kitchendesign #dryerrepair #stoverepair #applianceparts #bhfyp #diyappliancerepair

[HoosierSummers]

Thank you so much!! We have a top loader LG Washing Machine, same model number. Our machine has been making a grinding, slipping noise upon agitation. After three weeks of being tossed around by the LG company seeking tech help, Tech finally came this morning, did a few tests &, said everything is fine. However, we still have a malfunctioning washer. You have saved the day! AND our washer is still under Warranty, less than a year old.

[lorenz]

Does anyone have a video of the agitator working as it should?

[scrapman]

I work for an electronic / Appliance repair company. We worked on a customer's Lg washing machine almost exactly like this one. Had the same problem. We ordered the agitator plate. But when We installed it, the gearbox/transmission made a horrendous noise, so we ordered the gearcase. Now, after the new gearbox was installed, we ran a test cycle on it, and when it came time to agitate the plate, it still did not work. We thought we received a defective gearbox so we ordered another one. Nope, same problem. The shifter motor or clutch motor was working fine. It turned out the rotor was the culprit. When we loosened the nut, the agitator plate would work, but when we fully tightened it, it would lock the gearbox, and the agitator stayed locked to the drum. Somehow the center part of the rotor slipped inside the hub so the inner part of the stator was rubbing up against the gearbox.
The actual fix is to replace the Stator, but thinking about it, a temporary fix would have been to get a hammer and a small socket and pound it in a little to move it back into position.
Basically, the stator is a heavy flywheel without a locking key. There is nothing but friction stopping it from sliding up and down the shaft. The gearbox has splines and so does the stator, but if the splined part is just press fit into the stator, what's the point?

[davidbauman]

Wow thank u for this video it took so little time to teach me to save so much money..well done

[unknownsamoan]

You explained perfectly brother. No need to go back a listen. Thank you for your video. Blessings.

[ivanfigueroa]

You save my life and my washer machine.!!

[JA-dscl]

Thank you this worked for my LG Hydro Shield Easy Reach (with the control panel in the front) washer 👍

[lisahaley]

Thank you you made it very clear and I understood everything and now I know what the problem is you're awesome appreciate it

[jackiemcmahan]

Great video! I appreciated the detail.

[stewartmckinney]

Thanks I watched half and figured out screw underneath cap was loose

[mickee]

I have to go diagnose this same lg washer tomorrow and it doesn't agitate. I will definitely check those plastic teeth... Thank you

[michaelellis]

Awesome! you just saved us hundreds of Dollars!

[UhBuddy]

I have one of those little harbor freight blue LED lights. Those things are the bomb!

[pinkrainbowkennelz]

Thank you YouTube University for saving me Millions🤪😘

[rickj]

Excellent video. I'm having a bear of a time trying to get the agitator out though.

[jamesobrien]

Awesome great explanation why everything but the clothes won't move

[thayomammawarnedubout]

Kill the background music it's very distracting

[kishoremaharaj]

I have a LG - 3 step . Fuzzy logic .wf-t7014pp (top loader )

[bruceplacido]

My bushing is seized on shaft. Is there a easy way to take it off without damaging shaft?

[tonythan]

What is the name of the middle steel nut? I want to order only that metal piece.