Getting started with STM32 built-in USB DFU Bootloader

This video demonstrates how to use STMicroelectronics’ built-in STM32 USB bootloader to program or upgrade the device firmware.

[osmanozdemir]

Can i do with blue pill (stm32f103c8t6)? please answer me quickly

[chloep]

I have a STM32F429I-DISC1 and I want to activate the USB port CN6, it's why I watched this tutorial but it doesn't work. My computer doesn't detect this port. Despite, I connected the pin BOOT0 to VDD and BOOT1/PB2 to GND thanks to jumpers, then I reset but the DFU port wasn't detected by the computer and the screen of my STM32 became fully white. I have the feeling that the solution shown in this video doesn't work for this type of STM32. So I would like to know what I am supposed to do to make it work.
If someone knows, thank you for giving me the answer.

[danielliden]

I have an STM32F4 with both BOOT1 and BOOT0. I guess the BOOT0 is just as this video (tie to supply when programming). But how should the BOOT1 pin be pulled?

[KeyboardMac]

can it also copy or read the code from the STM32 chip?

[aaammm]

what is the jumper setting for stm32l152 discovery board to go into DFU mode

[nachocelano]

Hi, we are working on a STM32f407VGT6, we want to upload VESC bootloader. Do anybody know if it is possible?
We succeed in uploading all the files but VESC tool does not recognize it....

[maciejgrochowskii]

Is DFU working properly without external crystal? I remember that without crystal I had a lot of issues with embedded USB on microcontroller

[Nachodis]

For what it's worth to save someones time: it seems that Dfu File Mgr and DfuSeDemo are deprecated on windows 10, it's recommended to use the stm32CubeProgrammer in USB mode.

[sagark]

sir, i have only connect boot0 pin to vcc to enable dfu mode.there is no another process is required

[TheCoolest]

The circles you have to spin in to just get one thing working is criminal.

[Mitt]

How to program read-out protected device from bootloader over DFU?

Can i enable read-out protection using dfu mode after programming?

[osmanozdemir]

Can I upload code to the same processor over and over again this way?

[FrodorMov]

Well god damnit, just had boards manufactured with boot0 to ground. None of the documentation on the stm32f072 mentions the USB bootloader. Well, the STM32F072 Discovery User Manual (UM1690) does... I mean, really ?

[joaoteixeira]

I have STM32F407VET6. I can upload programs in DFU mode, however when connecting the board in USB Serial mode, STMCube shows this error:

Timeout error occured while waiting for acknowledgement.
Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again...

How can i fix it?

[jdmuys]

I need a Mac version of the software too

[mikewaxx]

ok what you mean is "getting started with the 72 disco board" these directions won't work with any other hardware.

[Aleynikov]

When STM soft will comparable with MacOS?