Amazon PDR Paintless Dent Repair Kit Review

Using an Amazon Paintless Dent Repair Kit. PDR. DIY. First time use and review.

[tgreenid]

You've given me the confidence to try this myself, thanks!

[nick.]

The “line board” is a cheap version of a light board, highlights the dents better, the real ones are just like it but its also a LED light mixed with lines to see even better that a real dent guy would use

[Bachatango]

Yes, I had the same experience, got to about 98% removed. But it took patience, and I will probably try it once more to see if I can get to 100%,

[chadglass]

Thanks for this review and demo. I'll go ahead and buy the kit.

[NoelNoelRoll]

The board with stripes is a reflector to make dents more visible.

[mechieprime]

That thing with the line can shadow on the car to show the dent curves

[johnmorgan]

awesome job on that dent..i just bought the kit and gonna fix a few dents on my new silverado let someone use it to haul funiture and they jackknifed trailor into truck bed so now im stuck pulling dents cause co-pay 1000 bucks and times are hard lol and i think i can get them out enough to live with. so thanks for the awesome video

[mechanicaltech]

My bag came with a yellow reflected stripe on it too, was wondering if they thought you could use it as a "Line Board Reflector" lol 😅

[adrienbastarache]

From what i see you used a rectangular tab, you should use the round one for round dents and use a small one if it is too big you lift the edge around the dent and make you more work, if your cars has wax on it, it should be buffed off and cleaned with 90% alcohol, also clean your tabs too, i would only have use the the slid hammer because of the curves body, you could have made more damage with your little puller.Have a nice day.

[gavingillespie]

Sorry, I am a bit late on this discussion, I have just ordered a kit and was looking for suggestions on how to use it. I saw a few comments on here about using Isopropyl alcohol to clean the bodywork, and tips, to make the glue adhere better. This seems counter productive to me as Isopropyl alcohol is what is recommended to remove the glue, so you are effectively cleaning with the release agent, and it is hardly surprising that the glue didn't stick to the tips in the first attempts. I would have thought that cleaning the section of the car where the dent is, (and the tips if necessary), with soap and water, and then drying thoroughly before using the glue, would be the correct way. When the kit arrives, I will try it the soap and water way and see if that makes any difference.

[jmza]

Great video. It’s a decent tool, I did notice after my 2 attempt on different dent using a lot of glue when attaching those plastic plugs.

[JESSEPAVON]

Any updates amigo? i do a little auto body work and I’m new at PDR, just order the same kit and made a few PDR roads. Nice vide man you really did a good job.

[johnbranch]

The reflective triangle on the bag is for; when you have a minor fender bender and you can fix it on the spot.
Like, no call to insurance etc. I got this

[michaelross]

The thing with the lines you reflect the dents on car with it and it shows the dents .... Where ever a dent is lines in reflection won't be straight

[johnhall]

I have been looking at these chepo pda systems for a while .
The board is supposed to be a reflective light that puts bars.
The bars help in dent removal; they are normally 12v lights .
I did notice there was no cord on the boards .
Thank you for this video. It confirms my thought’s rubbish .

[PatrickM-hj]

thats a great kit for a hobby dent repairist keep up the great work. Im in the UK and I got a cheaper ($10) kiT at LIDLE. DONNO IF THEY ARE IN TEXAS. VIDEO IS WELL PRESENTED AND GOOD ADVICE

[oz_medias]

You let the glue dry too long. Letting it only just start to set up (tacky) will give a better/more elastic pull.

[donaldstepp]

No expert here either, just watching videos and found one you tuber who does paint less dent repair instruction. He said first thing you want to do is push from behind . The glue puller is good but he was teaching how to be faster

[imagertube]

Nice job! A little more glue in your pulling tips will do better pulling!

[ozakarisozacra]

I have gotten one myself, I will have a crack at it soon....got a bit of hail damage on my car, I will see how it goes...but I can say already is not going to be easy...Thank you for the honest opinion.