Dent Puller Paintless Dent Repair Tools Kit with Glue Gun Review

----------
LET'S TALK ABOUT LIVING BETTER:
----------
IF YOU'D LIKE TO SHOW SOME LOVE:

FOLLOW MY OTHER SOCIAL MEDIA PLATFORMS:
----------

As an Amazon Associate, I earn from qualifying purchases.

Yoohe
Yoohe Paintless Dent Repair Tools Kit - Gold Dent Lifter with 15pcs Dent Removal Pulling Tabs Suction Cup Plate PDR Hot Melt Glue Gun Pro Glue Sticks

MUCH CHEAPER THAN BODY SHOP REPAIRS – There is no high paint material & labor costs associated with a conventional repair, so it will save 90% at least by PDR tools making dent removal.
INSPIRED DESIGN – Gold dent lifter on the bottom is silicone, soft and not harmful for oil paint and can be teared down, one screw on the top of the dent lifter is used to adjust the middle height of hand lifter
WIDE APPLICATION – The mini hot melt glue gun with glue sticks is not only for car dent removal, but also can be used in DIY home repair
TIME SAVING – No need wait for the car dent repair in repair shop, most of the dent removal can be finished in half hour.
ENVIRONMENT FRIEBDLY – No chemicals or other toxic material are used in this process, paintless dent repair can insure 100% protect the original paint

Color:29Pcs
AUTO BOAY PAINTLESS DENT REMOVAL TOOLS KIT

Why not save the money for dent repair to buy one bottle of your beloved wine, or enjoy a sunshine travel?

One of the most annoying and frustrating things is when you find a dent on your beloved car. Sadly, some drivers will just drive off and never say sorry! Even if the driver leaves contact details, there can be a lot of frustration dealing with body shops and insurers.

No more waiting!
No more paying for the body shop repairs!

PDR (Paintless Dent Repair) Tools are the new products, for removing most minor, and/or even some major dents, without repainting the vehicle and damaging the factory finish.

The Paintless Dent Removal process is 100% environmental friendly.
¨C As of no chemicals are used, so there are no toxins being released into the environment.
¨C The work is only carried out on panels, which can be repaired by Paintless dent removal.
¨C The Dent repair process involves manually massaging the dent from behind using hand tools where no electricity is needed.

After completing the dent removal, the vehicle will still keep the factory finished look-like, without the need of any sanding or paint touch up.
Paintless dent repair is only a tad cost when comparing to a body shop repair. The main reason is no labor cost and no high paint material cost associated like a conventional repair.

As you can see, Paintless Dent Removal Tools are your best choice when getting your cars out of those ugly dings and dents.

Packing List:
1 x PDR Bridge Dent Puller
8 x Glue Tabs
1 x Mini Hot Melt Glue Gun
5 x Yellow Pro PDR Glue Sticks
5 x Black Pro PDR Glue Sticks
2 x Rubber Scraper

Note: Dent repair is a slow process, please do not pull with great effort to want to repair it in one step. Expedition Money LLC
A Financial Wellness Program That Works

[BrettPlaysWithGuns]

Hey man the fact that you continue going to see if you could get it to look as perfect as possible... while maintaining that it's an imperfect cheap fix, that's what sold me on this video. You earned a subscription!

[dgriffin]

I purchased this PDR kit not really expecting much, but given a $1100 quote to remove a golf ball sized dent and a few scratches, I thought it was worth risking $40. The golf ball sized dent is 80% better, and I am confident I can remove the remaining depression. I was skeptical that the hot glue was strong enough, but is surely was. Slowing pumping the lever and holding it for a few seconds seems to help. Tip on removing the glue from the pieces that adhere to the dent: use a heat gun to re-melt them and a putty knife to scrape off the glue; it's a lot easier then trying to remove the hardened glue. Also, the glue gun that comes with the kit must be "cocked" i.e. the orange plastic piece at the rear of the "gun" moved back before inserting the glue stick; otherwise the glue stick will not advance with trigger pulls; which reminds me of a Seinfeld episode where Jerry's fear of riding a horse leads him to ask for the one named "Gluestick". Merry Christmas.

[ep]

After watching one of the demo videos, it appears that on the last try (when it didn't 'pop') you should have screwed the center knob in. From what I can see, that knob isn't there just to make the thing look pretty, it picks up the slack on the longer stemmed pads.

[Alycanj]

get some 91% cheap rubbing alcohol, clean the area first, then just a dab on the plastic razor or scrapper will dissolve the glove instantly, save that scrapping off. You absolutely can get it perfect, use smaller tabs as you go, clean glue pull, alcohol off glue and keep going, if dent goes above flat then use the plastic tap down tool and hammer that comes with and gently tab down in place.

[celticgypsy]

The newer models seem to be more pliable in cars these days. I’ve bought one of these kits hoping it will work on a 26 year old Isuzu. But I think the steel grade is thicker. It has a few small dents on the hood where a timber load slid forward a couple of years ago.

[lassanatoure]

What a great tutorial video! My kit came without any instructions... you just saved the day!

[ramonrivera]

It looks good for an everyday driver you're always going come across a few dings I like the product cuz it will hide big issues.

[salesenablementon-demand]

It's really about which size paddle you use and where you place it in the dent. You should have used an oblong piece rather than the circle

[fakiirification]

spring for a better kit with a slide hammer and some behind the panel tools. the mini-lifter is the wrong tool for this particular job, you could get it perfect with some lever tools behind the interior door panel to push it out from inside, and a line board so you can see what your doing. PDR is easy, but time consuming for a quality repair. That's the main thing you are paying for when you take it to a pro... their time.

[rhettoracle]

I think I'll just hot glue a bunch of those multi colored plastic pullers all around my car. Bet if I leave them on, nobody will notice the dents and dings. :)

[fsj]

Was there a difference between the black and yellow glue sticks? I bought a slightly larger version of the same set and it came with virtually no instructions.

[sebastianarcila]

Is there a reason why glue get loose every time i try the tap get loose with the glue and dosent pop the dent i leave to dry a bit

[AL-gomv]

If you want to be able to see the dent use a panel with lines that reflects on the door.

[scottjones]

You did the right thing not popping the last one off he would’ve definitely had a high spot look pretty good to me good job

[OverlandTT]

I saw a guy at the mall, he said 5 dents on different body panels on a Porsche Cayenne was £80 for the lot to be done ($100-$110 US) and only needed the car an hour.

[ThePlowGuys]

I am sold. I just ordered one. I have a few dents that bother me but don't want to spend the money on the car for a pro to do it. Thanks for sharing.

[LittleguyBigReviews]

I’ve been looking for something like this. Thanks for this 🤙

[Creativefoodyanny]

is this useful for bike dent tank repaire

[rockykisner]

Thank you for the video, I will be purchasing this tomorrow.

[spadelives]

Awesome video, although it would have been a lot better if there wasn't a mottled reflection coming off the garage floor.