Saab 9-3 No Crank No Start❓ Check This Out

Do you have a Saab 9-3 no crank no start situation❓ Your Saab 9-3 won't crank AND no clicks, NO life from underbonnet❓ Try this solution to start the car. Saab 9-3 common problems. #Shorts

Here's your Cyclone Cyd Saab top tip of the holiday weekend. My Saab 9 3 won't start I hear you cry❗ If you are getting no crank no start no click OR no crank no start no communication from your 9-3 when you turn the key, this video short will explain one possible cause that is definitely one of the Saab 9-3 common problems and is extremely easy to test for.
In another video, I show you how to carry out a strip down and repair this problem without buying a new module (which is what any garage would advise 💰💰). 👆 click on the video link above.

💡 Subscribe and hit that bell 🔔 to learn more about looking after your car.

Learn more about looking after your car:
🎥 Don’t let your fuel filter end up like this 100,000-mile old example:

Everyone should have a tyre pressure gauge in their glovebox:
I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)

Are you trying to grow your own YouTube channel? I use TubeBuddy, try it out for FREE:
Gear I use in filming and production:
My videos are edited with Filmora X - try it for free

Thank you

saab 9-3 no crank no start, saab 9-3 won't turn over, saab 9-3 wont crank, saab 9-3 wont start, saab 9-3 common problem, no crank no start no click, saab 9-3 common problems, my saab 9 3 won't start, no crank no start, no crank no start diagnosis, no crank no start no communication, u0212, u0212 saab 9-3

#savesaab #savinganothersaab #saab #saabaero #saab93

[krabba]

Thanks a lot for the tip! I was trying to start my car for 30 min yesterday and I was in the middle of Stockholm at an expensive parking.
I was about to give up and call a towing truck and then I found your video and I opened the ABS module and cleaned it with what I had (mostly blew on it) and it started so I could drive it home!
Thanks again! You saved me a lot of trouble and money 😀

[elbmensch]

Thank you so much. Because of your videos I was able to repair my Saab 9-3 2.8 Aero. And I also learned a lot and understand that car much better. Before I thought everything in electric is broken. This no start was make me getting crazy. Greetings from Germany 🙌🏻🙏🏻 For me I changed the ECU, the ABS-module and the purge valve, .because my car didn't start well after getting fuel. So it was a whole journey with all it's issues. The ECU came from USA, the purge valve from Italy and the ABS-module as a spare part from a 9-3-driver near by. I have had to change an other valve behind the purge valve, too. It was broken (maybe I destroyed it as I changed the purge valve) and it eems to be there for the breaking system. Holy....don't want to know how expensive this repair would have been, if I didn't do it by myself. I paid 260 Euro for ECU and 120 Euro for the copy service, 45 Euro for ABS-module, 50 Euro for purge valve, 50 Euro for the other valve, 70 Euro for TechII service.

[jordanrussell]

ABS module failure = no crank no start. Absolutely brilliant. Can't imagine why they went out of business.

[nicholaswatson]

Love it when motorists share hot tips to diagnose troublesome faults.

[michaelelkin]

Thank you. You are a life saver. I was on a trip and this happened. Saw this clip, removed the connector. I could not find cables, but when I re-connected, it started right up. I did have a check engine light and stability control system failure warnings for a day, but went away as I was going to get the codes read. Thanks again.

[mattssonfelix]

You are really a saint, you've saved me and my Saab at least 20 times🙏

[rickeyjohnson]

Your awesome!!! You just saved me some money. We been trying to figure this out for a month. 5 min after watching this video it cranks no problems.

[martinzhu]

I've had this problem these several days, and it was making me so frustrated. I watched your video and cleaned the abs module with the contact cleaner, and it just worked!!!! Marvelous tip thank you.

[kwameadumantey]

Thanks big man, you saved lots Ghana cedis, am in Ghana and you have saved me a lots Thanks again

[ABC-epem]

Nice one, been trying to start it for 20 minutes, saw your video and just wiggled the connector to the ABS ECU and it started first time. Might be why I occasionally get warnings about traction control disabled (or something along those lines!)

[frisofokker]

love it when the first video you come across is the fix! thanks!

[davidanderson]

I will try this tomorrow, sounds promising :-)

[sterothwell]

Hi I've got the same fault. No crank traction control failure fuel gauge doesn't work and fuel pump doesn't prime. Tried your by pass but still didn't work. Took the abs module apart and all connections look ok. I'll re solder them anyway but any other ideas ta

[DerSchoermbro]

Classic Saab, dry solder joints. When something in my 9000 didn't work anymore usually a quick re solder solved it.

[lorcant]

could something like this also affect powersteering? I have TC failure and abs Failure, no fuel, and wont even attempt to start. (happened while I was driving and the powersteering stopped working too)
Thanks!

[davejohnston]

Thats a great tip. I've had problems with a number of ignition modules that stop working or very unreliable, very inconveniently. Is there a shortcut/easy way to install a push button start as backup?

[JS-rirx]

How on earth would you even know this but well done

[CrazyColp]

The odds are high. 2.0 or 2.8 both have the problem. Grind open the module, roflow the connector and glue back shut. And fixed.

[kpotet]

Does this also happen to the 2004 9-3?

[FranksWorld]

Happen to me…Saab repair shop sent it out for rebuild …cost me $900… ten years ago…. Wish I new this trick then…👍✌️