filmov
tv
LED control using Digispark Attiny85 #arduino #ledcontroller
Показать описание
In this short, I've controlled an LED using a potentiometer and Digispark ATtiny85.
This board has 8KB of flash memory, SRAM, and EEPROM of 512 bytes each, 6 digital pins, and 4 analog pins. Due to the onboard 5V regulator, it supports voltage between 7 to 35 volts. There is also a built-in LED connected to digital pin 1.
It has 6 digital pins(P0 to P5), 4 analog pins(P2 to P5) that can be used for analog input, and 3 PWM pins(P0, PI, and P4).
This board has 8KB of flash memory, SRAM, and EEPROM of 512 bytes each, 6 digital pins, and 4 analog pins. Due to the onboard 5V regulator, it supports voltage between 7 to 35 volts. There is also a built-in LED connected to digital pin 1.
It has 6 digital pins(P0 to P5), 4 analog pins(P2 to P5) that can be used for analog input, and 3 PWM pins(P0, PI, and P4).
0:07:33
0:24:56
0:00:18
0:01:42
0:00:24
0:06:06
0:00:05
0:02:44
0:23:48
0:00:44
0:00:26
0:00:22
0:09:16
0:02:48
0:09:58
0:44:30
0:00:16
0:00:10
0:00:06
0:00:27
0:00:06
0:02:19
0:13:53
0:00:21