Digispark Attiny85 with #arduino

preview_player
Показать описание
Digispark Attiny85 board has 8KB of flash memory, SRAM, and EEPROM of 512 bytes each, 6 digital pins, and 4 analog pins. Due to the onboard 5V regulator, it supports voltage between 7 to 35 volts. There is also a built-in LED connected to digital pin 1.

It has 6 digital pins(P0 to P5), 4 analog pins(P2 to P5) that can be used for analog input, and 3 PWM pins(P0, PI, and P4).
  1. THE ELECTRONIC GUY
  2. arduino
  3. digispark
  4. ATtiny 85
  5. ATtiny
  6. USB development board
Рекомендации по теме
Digispark Attiny85 with 0:00:24

Digispark Attiny85 with #arduino

Digispark ATTiny85 and 0:06:15

Digispark ATTiny85 and Arduino IDE: A Few Things You Should Know!

Digispark ATtiny85 with 0:03:09

Digispark ATtiny85 with Arduino 2.0: How to program?

#66 AT Tiny85 0:28:39

#66 AT Tiny85 Digispark - Arduino UNO alternative? An introduction!

ATtiny85 Board First 0:03:24

ATtiny85 Board First Look and Review | Install Drivers & Use with Arduino IDE

How to program 0:03:53

How to program Digispark ATtiny85 | Updated working method 2025

Digispark ATTiny 85 0:00:37

Digispark ATTiny 85 as a USB Rubber Ducky.

how to setup 0:03:48

how to setup Digispark Attiny 85 (tutorial)

Arduino Tutorial: ATTiny85 0:04:40

Arduino Tutorial: ATTiny85 board A First Look and review.

Getting Started With 0:10:42

Getting Started With Digispark Kickstarter ATTINY85 || Attiny85-20SU Development Board Micro USB

Start using Digispark 0:13:53

Start using Digispark USB ATtiny85 Arduino board with blink and relay example | Robojax

Digispark | Attiny85 0:00:16

Digispark | Attiny85 | Technology | Robotics #shorts

How To Program 0:12:41

How To Program Attiny85 Digispark Kickstarter with Arduino IDE || Program ATtiny85 directly via USB

Unboxing ATTiny84 and 0:06:14

Unboxing ATTiny84 and Setup Arduino IDE to program it(Digispark ATtiny85 -Digistump)

Introduction to Digispark 0:01:59

Introduction to Digispark ATtiny mini arduino board - instalation tutorial

How to use 0:03:31

How to use Digispark ATtiny85 smallest & cheapest Arduino compatible board

Unlock Any Mobile 0:03:05

Unlock Any Mobile Phone with 6-Digit Password Using Digispark ATtiny85

ATTINY85 DIGISPARK SUPPORT 0:00:31

ATTINY85 DIGISPARK SUPPORT ARDUINO IDE! #shorts

Digispark Attiny85 and 0:00:26

Digispark Attiny85 and Arduino mini in action #shorts

Digispark Board, Arduino 0:00:28

Digispark Board, Arduino ATtiny85 USB HID,DIY Arduino USB joystickt

Smallest Arduino Dev. 0:09:14

Smallest Arduino Dev. Board | Digispark AtTiny85 | Getting Started

Step by step 0:07:26

Step by step : Digispark attiny85 development board

Program the Digispark 0:02:51

Program the Digispark ATTINY85 | Updated working method 2025

Digispark Arduino ATtiny85 0:24:56

Digispark Arduino ATtiny85 USB - Installation - Control RGB LED - Blinking LED

Комментарии
Автор

Made a Rubber Duckky from this, very good

ChickenBoom
Автор

Well, it is a good way to show that something is on, but can you connect external storage? Like use it as a replacement part for the usb connector?

HiddenInMusic
Автор

What's the price of theAtiny85 pcb

venkatramanj
Автор

Arduino consumes too much ROM. If you need something more than blinker from attiny, it's better to remove Arduino and use something low-level.

volodyaleo
Автор

That's 24 seconds of my life wasted !
What are you going to post next ? Maybe a video of your favourite stone eroding away because of a snails fart ?

dmax
visit shbcf.ru