DIY Basics - 1ch dc 5v/7-32v Relay Module switch + clean NO/NC contact eWelink - Alarms/ relays etc

DIY WIFI 1ch dc5v/7-32v OWSOO Relay Module switch with clean NO/NC contact works with eWelink app . Link to schematics below.
You can control anything from an alarm to a gas heater !
Please like and subscribe if you like the video, thanks for watching.!
Links below to some of the products i used in the video:
Link to schematics:

[royzamora]

Master!
Your model and explanation was crystal clear
Thanks!!!

[olddanb]

Hi LeOnline.
Excellent info, thanks very much. But I'm still confused.
Can this device go in line on the negative side of a 12v battery to dissable a running generator engine?
Or could I fit it in series to disable the fuel pump so that the engine runs out of fuel and stops that way?
This is a stopping event that i want to create. Not a starting one.
Thank you.

[MsVincentC]

Hello,

Very useful video and I even recommended it to a few of my acquaintances.

But I have a few questions - I hope you will be able to help with the information.

1. In addition to controlling the AC 10 A, can something of the order of 12-24-32 V be output at the AC/DC output? Your example is currently with 220v 10A AC.
2. Where there is an input DC 7-32V only for the power supply of the board and does it serve or then the power supply that we have supplied in "imput DC 7-32V" can come out in the output?
Thank you in advance!

[JoaquinRaggio-bukn]

it works only in the local network or its possible to control through internet out of the network?

[whocares]

Got same module. Has power, connected tonapp, can control. But device does nothing. I've tried all 3 contacts. Device works fine direct to battery.

[jcody]

i subscribed just because this video was EXACTLY what i needed. thank you! i wonder if the wiring is the same for a 2 channel

[martinlawes]

Can I control 12v leds with this and which 2 connections would I use, thanks Martin

[dhky]

Can this method be used to switch between 2 amplifers that are connected to one set of speakers or will it burn out?

[MrBobWareham]

Very nice sort of Sonoff ish then! that would be good to turn off on the bench power supply or lights

[leonline]

if you mean on the clean NO/NC no problem, that's why it's called "clean", you pass any voltage up to 220v.

[myhomelab]

I want 12v load with wifi it can be work with 12v?

[johnnyboy]

Will this work with a 5 volt feed to the 7-32 v terminals. ??

[paulolemos]

Hi man, great presentation!
Do you know if it only works with Wi-Fi? Or can it read rf frequency? Example: garage doors

[marionichilo]

Hi. do you know if there is a Bluetooth one. would like to use it on my van for a simple alarm. one side when doors open the horn goes off. thanks

[enghamedhamdy]

How much is it now, can you send it to Egypt 😊 thanks

[Anthp]

How many amps? Could I use this to turn on off just a 12v 160w fan? :)

[olegdasha]

How many remotes can be connected to that switch??

[andrewtremblay]

If I was to power a 12v LED light through this where do I plug the wires into?(

[burnjack]

Can this be used with a 12v house led light number? To turn on / off (address number on the front house)

[oc]

I have nice rox600 slising gate. Can you please check on it manual where i have to connect Com and NO contacts there?