Engine not idling properly? Cut the pilot jet off.

If your small engine is not idling properly check the pilot jet. Get a fine wire and run it through the opening until you see it come out the other side.
If it still doesn’t work then cut it off and try it. If that doesn’t work then get a new carburetor. This should only be used as a temporary fix and not permanent to avoid damaging the engine.

Thanks for watching. Subscribe if you enjoy my videos.

[scottfirman]

You can use a jewelers drill bit to open the pilot jet up, stepping up a size until it idles properly, NEVER cut the jet off.

[Maxumized]

He left off…if it still doesn’t work then hit it with a hammer

[pisperbyby]

That's works we're wheel my engine got 1, 5h power

[simplestatic]

Mine snapped into pieces trying to remove it

[joelcimafranca]

After cutting the pilot jet will it still works?

[samueladitya]

My generator runs fine before I cleaned the carburetor and pilot jet, but I think I messed something up, tore the pilot jet lower rubber o ring and removed it anyway, then it's surges. Replaced the o ring but not the right size, no longer surging but the engine is too easy to start with just little pull. How come you cut the pilot jet off and not putting excess fuel?

[skozlozlaurie]

Doesn't this suplly too much fuel?

I snapped my tiny drill bit inside the pilot jet hole trying to bore it out a

[rickywhite]

I'm sorry I don't know what you are talking about because the pit is in my carbator

[adventures]

My mini bike keeps revving all the way up to full throttle . The linkages are good but I don't know what's the problem

[collinrisley]

next: smelt it into a disk and etch the word "muhkanik" on it. Congratulations, you are now officially recognized by the board.

[Dr.LongMonkey]

I just get rid of the whole thing and buy another one

[turbnasty]

Lol guys come on its clearly a joke there's not even a jet in the plastic housing. Watch when he cuts to that scene the jet has already been removed before he cuts it. If you ever had one of these apart you know what the jet looks like in there.