FAST & EASY FUEL INJECTOR CLEANING GUIDE

This is a fast and simple way to clean your injectors at home without any complicated equipment.

♦♦If you find this video useful, remember to give it a thumbs up!♦♦

Disclaimer:
Due to unforeseen factors beyond the control of SuperSpeakers, it cannot guarantee that the information provided here has not been modified or altered in any way, shape or form. SuperSpeakers does not assume liability for any injury or property damage incurred as a result of the information contained in this video. The information contained in this video does not express or imply any warranty or guarantee of any particular result. Any loss, damage or injury incurred as a result of the tools, equipment or information provided in this video is the sole responsibility of the user.

[carolinawestern]

I'm glad to see that someone else takes the time to do this and clean the entire injector, and demonstrated that it's not as complicated and costly as some customers are made to believe.

[adriancharlesworth]

Cars been misfiring for the last 2-weeks new plugs new coil pack new HT lead no joy took your advice on cleaning fuel injectors works perfect now you know your job well done 👍👍👍👍😊

[johngiegler]

This video is why I love YouTube; it makes me a whole lot smarter than I really am! Thank you for a great video.

[trackrunner]

Wow! Somebody who actually knows what they are doing! You are a master of your trade! Thankyou for teaching me how to clean and test injectors.

[patriciomunoz]

After looking around this is the best injector tutorial of all YT

[godfirst]

I need to do this! I was thinking about buying a set of new injectors but all I may have to do is this.
Thank you brother. You are a blessing from the Lord!

[iamvernon]

The best tutorial I've seen with the least required amount of accessories I've already got the stuff at home I'm excited

[siliconvalleyengineer]

you posted a good injector cleaning video. for sure removing and replacing the fuel filter sceens/baskets must be done.

[eddie]

I just tried this on my 07 hayabusa - I thought this was a very helpful video - thank you for posting!! I did use b-12 carb cleaner though since i had some laying around - my injectors are soo much cleaner video was super easy to follow and your tapered electrical tape method...what?!?!? - fantastic!!

[freddyflintstoned]

Very informative. Thanks. I have 24 year old injectors and the O rings and rubber are quite hard. I would be hard pressed to reuse them. I bought a rebuild kit on EBay for under 20 bucks.

[DMVGamingDose]

This is the most best injector cleaner videos because it's sooo simple that any automotive DIY person can do.

Good stuff.

[thatonedude]

Best and most simplest injector cleaner period!!! Thank u!!!

[duster]

Brilliant! Best injector cleaning procedure I've seen.

Cheers.

[SoulEndeavorsMusic]

Thanks so much! I've looked everywhere for a simple way to clean my injectors and this couldn't be any better!

[andrewngwenya]

Thank you so much for the detailed and easy cleaning procedure and storage.

[nahid]

TBH, this is one of the best injector cleaner video I have ever watched. Excellent work!! thank a lot

[noelgutierrez]

Awesome video!! Thank you so much, was able to clean my mom in laws injectors and got her car running like new. Appreciate this video greatly

[davidsimmons]

There are injector rebuild kits that cost $10-20 dollars, they include caps, filter baskets and o rings. It really is a must to change these out after cleaning your injectors. A ohm test would also be advised.

[sgloki]

This is a decent start. Reverse flushing works better, and while you are doing all this, you should replace the microfilters, it's quick and easy, and backflushing assures you get any potential debris out.
To reverse flush: use a small piece of fuel hose that fits the front of the injector tightly, put a small hole in the hose to force your can of cleaner straw into, and block the back of the hose... PULSE the power to the injector, instead of leaving it on. move movement= more chance to knock crap free.

[ronplucksstrings]

Compliments on a very good hands-on video! In normal operation, Injectors are supplied 12V through a 6 Ohm current limiting Resistor which drops the actual V applied to Injector to 3V, so applying non-current-limited battery power scared me a bit at first, but I expect the V of such a small 9V Batt, connected to a near-short (of 1.3Ohms Injector R), will collapse the V to something non-damaging to the Injector (I realize it is only applied for a fairly limited time, but you should emphasize this also)...have you measured what V it collapses to? The only thing I might add is to check for an even spray pattern when doing the pressurized flush...if it is not even around the pintle orifice, a longer soak or additional flushing is called for until pattern is even...this is pretty important and the goal of the whole process! I also like the idea of storage-lubing the injectors after the cleaning process. Cheers

Edit: From a safety standpoint, it is also VERY IMPORTANT to emphasize the use of (nonflammable tetrachloroethene) "Brake Cleaner", and NOT highly flammable carb cleaner for the flushing operation...atomized highly flammable carb cleaner could easily be ignited by the spark when disconnecting leads from the inductive Injector. Don't wind up like Jay Leno! Work Safely!