🛁 How to Clean fuel Injectors YOURSELF | Cheap 💰 & Easy DIY 👍

I show YOU how to clean fuel injectors yourself with a cheap kit (~£10). Simple, easy DIY. You CAN clean fuel injectors without expensive tools 👍

💡 Subscribe and hit that bell 🔔 to learn more about looking after your car.

Fuel injector cleaning kit with worldwide delivery and various shipping points:
For more precise injector pulse testing, use a pulse controller:

Learn more about looking after your car:
🎥 Don’t let your fuel filter end up like this 100,000 mile old example:

Everyone should have a tyre pressure gauge in their glovebox:
I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)
If you’d like to learn about the science and engineering of cars:
Bosch Automotive Handbook:

Are you trying to grow your own YouTube channel? I use TubeBuddy, try it out for FREE:
Like my theme music? Need music for yourself? Contact my nephew, Anton, via Facebook

Gear I use in filming and production:
My videos are edited with Filmora X - try it for free

Thank you

how to clean fuel injectors yourself, how to clean fuel injectors, how to clean fuel injectors at home, how to clean fuel injectors with seafoam, how to clean your fuel injectors, how to clean your fuel injectors yourself, how to clean your fuel injectors at home, how to clean your fuel injection system, how to clean your car fuel injectors, fuel injector cleaning, fuel injector cleaner before and after, easy DIY, cheap, clean fuel injectors without expensive tools, cyclone cyd, clean your fuel injectors

[cvitkovic.viktor]

Flammable solution and sparks, where could it go wrong..

[projector]

On low resistance injectors of a few ohms resistance, I would do very short pulses less than a second each. As short as you can.

[projector]

I watched a few of these videos, and this tool would have been handy. Just adding info for whoever it may help. I used safety googles and gloves. Remember to safely depressurise the fuel system as it goes to 3000 PSI on mine - which can kill. I used the soft plastic red tip you can find in the lid of a can of lighter fluid as an adapter, which fit perfectly in my Bosch petrol fuel injector back. It deforms slightly to make a seal. I pulled the spray nozzle off the top of a can of carb cleaner to access the main straight nozzle. It takes a bit of coordination to hold it tight to the injector. I rigged up a switch so I could keep distance from the battery and reduce sparking (with heat shrink). It needs to be able to handle a few amps or it can short and burn your injector. You will be making a mist of flammable vapour so do this outside. It took a whole can of 500ml to clean through 4 injectors plus 1 spare. There was enough left to clean the throttle body and intake. The pressure drops in the can as you go. I'd guess that there is about 60 PSI of pressure in a new can. As removed from the engine, I found white waxy deposits coming from the tips of the injectors and along the body, where compression from the engine was forcing the deposits back towards the fuel rail. I've read this comes from water and gunge from the tank loosened by modern E5 fuels. Its cleans your fuel system and leads all the contamination to your precious injectors. But now it's all cleaned out. TYVM. Also if you use the lighter adapter, beware it can split towards the end of a can.

[cdracos]

I did same job without removing injectors.
Clamp of fuel pipes and remove. Connect spare pipes to fuel inlet then to cleaner can. spray cleaner directly to all 4 valves with
Engine running . job done in a jiffy, without removing virtually anything !.

[carlluscombe]

Brilliant video, will definitely be buying one of these kits, thanks for taking time to make the video.

[klecoxs]

Hi Cyd that was a superb video clear & concise info.
Thanks so much for taking the time to do this video.

[johndavison]

more detail on the adapter /s and where I can get them from would be a god send .thanks Cyd

[mounirfadios]

Useful easy and clear 👌🏼
Impressive explanation thank you

[ThayneGreene-pc]

I like the cleaning injector kit. It’s will come in real handy.

[hiddencatag]

Hey Cyd, thank you for such valuable information !.

[langheproperty]

Great video!!! Thank you! Mini Countrymen diesel became jerky on acceleration. I changed the fuel filter but still not good so will clean the injectors. Thanks!!

[CharlieWilcox-zn]

Well done sir! Thank you for the help !

[jamrockrc]

Thanks for the video good info as always 👍👍👍👍👊👊👊

[jerrymcg]

Very excellent vid, thanks Cyd.
Now to get the injectors out of my Twingo 1...

[EppingForest]

I add Redex to my fuel tank once per year… hoping that it helps keep the injectors & fuel system clean

[TooFlyNico]

Thanks a ton mate! Ordered my kit now. This will help me get my Volvo 740 running right ❤

[situationalawarenes]

One can see a difference in the first 0.5s. However, I would try to blow against the flow, to clean the filter.

[IkeDuah-zhkn]

Hi
Please how can I get some of the cleaning kits?

[jontehannigan]

petroleum based products wear out rubber my friend. silicon based work better for lubricant and conditioning. 303 aerospace too

[MonkeyPunchZPoker]

There's a video out there cleaning GDI injectors with a sonic cleaner meant for cleaning jewelry, you should check it out.