TOSHIBA LAPTOP MOTHERBOARD REPAIR NOT TURNING ON

#toshiba #laptop #repair #shorts
TOOLS
FLUX:

SMD REWORK STATION:

MICROSCOPE

MULTIMETER

OSCILOSCOPE:

POWER SUPPLY:

SOLDER PASTE:

SOLDER WICK:

HEAT PROTECTION:

TWEEZERS:

USB POWERMETER:
SCREW DRIVERS

[billcrm]

just pick the chip off and place a new one, the solder removal is not needed, use the solder remained on the board is enough.

[MagnataSilva]

What camera model do you use to record these videos?

[andreyivanov]

без нижнего подогрева становится тяжелее чипы на свое место садить.

[kikinit]

Did it work after you were finished? If so, that's all that matters. Good work. Your friends had valid points, but that comes with time and experience.

[KevinPaul]

May I ask why do you put so much flux on the chip?

[LabArlyn]

this Toshiba laptop seems to have higher componnent quality than Asus laptop.

[ThurisazKingslayer]

Where do you even learn to do stuff like this

[Angyjxx]

So does the SMD chip just slide off with hot air and flux?

[edwardlacson]

No lead spot inside controlled board sections

[JohnWardButOn]

Must have been a bricked bios I assume?

[AuK]

Я
Понимаю что вы щедрый. Но микросхеме это не понравится

[moisesnicolasabanto]

Cuánto de temperatura usa y cuánto de aire ?

[kondomelite]

Begitu cepat timah Fcb laptop ato televisi mencair tidak sekuat Fcb handphone 😅

[dokt]

Too much solder, not necessary to clean old solder to this kind of chip. Useless video