Removing & replacing a damaged hardwood flooring board

In this video, Jason shows us how to replace a damaged hardwood floor board. He goes step by step through the process of removing the board, and then how to cleanly install the new one. He gives you some great tips that you may not have known. If you have any questions about this video, feel free to comment below.

[not_today_satan_]

The experts always make it look so easy. You give me hope

[_TTT__]

Beautiful! You really made it look easy and non-intimidating. Thank you Jason!

[Lauracharlene]

So thankful I stumbled across you. Been wanting to replace sections for 21 years!! Thank you!

[berniepoirier]

You made it look so simple. I never thought of cutting 1/4" inboard. Very clever and thank you

[drbfitk]

Jason is a very humble man & makes that look easy b/c's very slick! All that you have to watch is his use of the circular saw and the cuts, to know this guy knows what he's doing.

[rickherr]

No need to cut tongue off replacement board just the bottom of the grove off. Replacement board cut to size by cutting off the tongue side of the board and remove bottom grove. Use a nail puller or table saw to take off bottom grove.

[michaelinmon]

Something I have not seen in the other videos for board replacement is setting the saw depth. Great job.

[seanyeah]

So much better than the convoluted how-to sites. I knew this was how to do it, but just getting a little confirmation helps a ton. Thank you!

[ms_taree]

omg i feel so less annoyed at all the cable holes in my hardwood floors at 1am will conquer ~ thanks for the video

[MikeDenny-beuz]

Going to help our son with his hard wood floors. Great information and looks easy. Thank you!

[odnetnin]

Thanks Jason! I have a section that was water damaged. I put the floor in years ago, just wasn’t sure how to go about fixing it.

[tangobayus]

Great stuff. I have a damaged oak floor and this told me exactly what I need to know.

[andrewgaudet]

You did that in literally a few minutes 👍 let's see if I have such skills 😂

[jonathanpruitt]

Good video and thanks for muting the saw.

[cmhbjborkeal]

Super helpful. I was worried it would be too hard. But your instructions are perfect and confidence inspiring👍

[AaronRiegel]

Thank you jason! I was set to cut the board out with an oscillating saw and I was sure that I was going to damage both opposing boards. Cutting in from the edges and then across is brilliant literally one of those brilliant moves that I never would have come up with on my own but is so practical

[BigRustyJoe]

Really easy to follow tutorial! Thank you

[pyrsartur]

Excellent! Very nicely done. Now I’m gonna go fix my floor!

[maha]

this looks easier than I thought, thanks!

[xviper]

Great video. Thanks for the expertise brother!