How To Align Your RC Vehicle

Welcome To Another Video By DJSPRC On How To Align Your RC Vehicle

Have A Comment Or Question? Just Ask...And I Actually Answer ( Not Like Some )

If You Like What You See Subscribe And Hit The Like Button

And Join The Group On Facebook

Djsp Media Production – djsprc/makeitscalerc

Publication, reproduction or distribution of this film by any means is prohibited without prior consent of the channel operator.

Djsprc/makeitscalerc is not liable for any damages or loss due to the reproduction of any techniques displayed within our content.

Djsprc/makeitscalerc is an independent promoter of a great hobby and our content is intended for entertainment purposes only.

[drewp]

nice to see someone posting this, i have also been at it for a fairly long time, couple points ill add....you can buy alignment tools for rc cars most do it by eye, its fair to say most probably dont even know if their cars have adjustable turnbuckles or where there located so your info will likely be new info to some. . you should try to adjust them the same amount for both sides, sometimes they come uneven from the factory this can lead to the servo trim needing to be centered. calipers work for checking the distance between ball ends. adjust based on cars full weight on the tires. raising and lowering affects toe and camber depending on the car some vary a lot more than high end racers will. some will argue about using toe in, and you see them always complaining about high speed erratic handling car swerving etc though absolutely refuse to blame toe out and rather replace servos tires shocks etc etc before never considering toe regardless of how many wrecks. example:high speed run, toe out. acceleration toe out is reduced in 4wd csrs due to the wheels pulling against any slop in the steering becoming neutral or even slightly toe in depending on car and wear. once the car stop pulling hard nearing top speed this becomes more toe out again and unfortunately any ground imperfections can send it into the weeds very quickly. braking will also cause even more toe out as the front end dips lower then the front end is just fighting for which tire will get or loose traction first.i prefer a little toe in on my dirt track cars, vs more neutral toe on the pavement. generally i dont ever prefer toe out, though this might be good for small racetracks with a lot of curves and short straights. in the end there are many things that affect handling probably more so in a rc than a 1to1

[andersoncarmodiogenes]

Toe in and out have different applications. It depends on the track you're going to try or even on your driving style. For you it's clear that you prefer a neutral position between those two options, but keep in mind that there is no right or wrong, it's all about preferences 😉 Of course there are also recommended ranges on which we should work for each configuration

[benignocasiano]

I just got the Tenacity TT with the same issue, right out of the box. I noted also the spektrum servo is not solid, may require a replacement. Very happy with your video, definitely works for me. Thanks

[cartere]

Best video I've watched on it so far actually doing it instead of just talking about it

[Temiko_Moto]

I thought I would have to return my RC car. But this helped me out if fixed it.

[tameredanslederriere]

Québécois accent for sure ! Nice video patron !

[emanuelhp]

Hello friend, how are you and happy new year. Hey, I have a hyper go car and I wanted to know how to balance the tires since they go a little to the right and not in a straight line. What could I do? Please, I need help if it's not too much trouble. ❤

[aliasangelalias]

i always get confused by what turning direction does what? I could be turning but not sure if it is in or out.. what's a simple way to remember?

[CharbelYaqo]

Pls answer my brand new rc buggy is not straight and I got it from TikTok for 40 dollars and goes 30 mph and the front left wheel is not straight and I don’t have the thing you have on yours help me pls 😢

[fernandofrancisco]

Toe in or toe out depends on how fast you want it to turn left or right?

[RevXRC]

I Know this video was 6 years ago but what if my slash 2WD rear wheels are facing outwards?

[zafirizz]

Hello I have the same problem but with the overmax monster 3.0 do you know how I can fix it?

[cocoasuransisemarang]

is the toe setting right and left must be the same centimeter? Using sketmatch?

[reidhall]

Will this upgrade, and or, adjustment,work on most Traxxas vehicles.

[steelphil]

Why does my car zig-zag, what do I need to adjust 110 scale Fox Edition made by Traxxas

[sdyksterhouse]

Do both remote and car need to stay on when doing this?

[motsse_]

My car tires turn left when I turn it on. I adjusted my trim on my transmitter and it still turns left when i turn it on would you happen to know what is wrong with it?

[DeonWessels]

2chamnel and 3channel resiecr not working.
Whar can i do

[sadatalipulo]

My rc monster truck had unusual vibration when i when i run it in full throttle while i am hanging it in my hand. The tires should supposed to be normally rotating without anu vibrations. But now after 1st run, it has a vertical vibrations which was not present at the beginning. There os something wrong with this. Please help me.

[chrisspearline]

Why does the transmitter need to be on for this?