Can A Bone Stock 302 Make 500 Hp On A Budget? Turbo Fox Body Mustang

#budget #builtnotbought #cheap
i challenged myself to build a BUDGET bone stock 302 block (with supporting mods) and a DIY turbo setup, to see how much power it would make and HOLD! IN STOCK FORM! This is what happened...

BUILD:
-FRESHENED UP STOCK 302 W/ STOCK FLIPPED PISTONS, STOCK RODS, STOCK CRANKSHAFT!
-E7TE HEADS CLEANED NEW VALVE SPRINGS (FOR SUPPORT) & COBRA OEM 1.72 ROCKERS
-STOCK CAMSHAFT, STOCK DISTRIBUTOR, STOCK CAM LIFTERS
-NO GIRDLE STOCK OIL PAN & PUMP W/ HEAD STUDS & ARP OIL DRIVESHAFT (THESE TWIST)
-STOCK INTAKE NO PORTING WITH STOCK 60MM TB AND EGR SPACER
-STOCK FUEL RAILS W/ REGULATOR & 42# FORD INJECTORS (TO GET MORE FUEL FOR TURBO)
-STOCK BALANCER, STOCK FLYWHEEL (MACHINED)
-ON3 MODIFIED TURBO KIT W/ 70MM TURBO HALF WELDED TOGETHER DIY
-STOCK T5 TRANSMISSION W/ BUDGET PIECED TOGETHER PARTS! (YEP IT WHINED TOO!)
-OLD CENTERFORCE SINGLE DISC CLUTCH WITH A SPEC 2+ PRESSURE PLATE
-STOCK 8.8 AXLE W/ UPGRADED JUNKYARD 31 SPLINE DIFF FROM EXPLORER & GEARS

SUPPORT THE CHANNEL: Click the JOIN Button for MEMBERSHIP!

#mustang #foxbody #neomustangs #turbo #Notchback #coupe #svt #cobra #on3performance #turbocharged #mustanggt #built #dynotested #mustangdyno #howto #diy #junkyard #stockblock #stockbottomend
___________________________________________________________________________________
SMASH LIKE, SUBSCRIBE AND BELL FOR NEW VIDEOS! (REMEMBER TURN ON ALL NOTIFICATIONS ON YOUR PHONE/DESKTOP!)

[CONTACTS]
___________________________________________________________________________________
[PLAYLISTS:]

Can A Bone Stock 302 Make 500 Hp On A Budget? Turbo Fox BodY Mustang

[RDub]

I ran a similar combo back in 2008. Stock motor, headstuds, 42lb inj, 255 pump, 60mm turbo, Air/Air, meth injection, Pro-M blow thru 3" tube MAF, 22° timing, NO TUNE. Never had it on a dyno, but it went 6.90s in the 1/8 @ 101 3200lbs thru a AOD trans. Fun and simple combo.

[tonycervz]

Rather break a 302 block than ls swap a ford

[paulhudgins]

Your right at the limits but not dangerous to engine damage, it doesn't seem stressed at all, nothing but
full sends to see what it will do. Love this stuff, thanks for sharing.

[boostjunkieMike]

Very impressive. This gives alot of us hope. Especially on a budget. Keep em coming. Thanks for being so inspirational and motivating to get the builds done.

[gtsmoke]

NICE! That little V8 can crank it out man!

Appreciate the detail man!

[aaronespinoza]

That's impressive man! I took mine a few days ago only made 298hp and 365tq . Tuner said i needed a better fuel system. Im running stock lines and rails with 47# injectors and i think a 255 pump. Was kinda disappointed tbh

[lanceam]

I thought you were tinkering with pops car again lol. Project hot wheels always gives me motivation to keep going with my car. Good job

[aaronliddell]

I make 555 to the wheels with an otherwise stock Explorer engine, on3 @ 11lbs and good supporting mods. 👍

[pimpovic]

Still my favorite car on the channel. Just love the color and overall build.

[FORDMAT]

That's great for a run around Fox and still have a little fun when you drop the throttle ..
Happy Thanksgiving Dan to you and yours sir!

[cyclonekevin]

That will give some coyotes a run for their money. Great job.

[blacksheepautoworx]

Nice, the torque is brutal on those heads, actually all the budget headers I have cleared the p’s got some on my 81 swapped rx7, 86 block, .30 over 4 eye brow pistons stock replacement, trick flow stage 1, and a edel perf. Dual plane runs clean not crazy quick but it’s fun. The other p’s are for basically same set up- but turbo for my 85 gsl-se swap with a mega squirt both t-5 cars turbo kit is an cx racing kit I bought and modified a few things still getting it together

[jhenson]

Cool stuff. What was the cost and what could I leave out to get 330hp for a fun daily

[stevenhowell]

What injector, what mass air, what ignition box, what wastegate and bov. Very nice build. Very impressive

[michaelwilliams]

So I'm looking around 350 to 400 on motor on my 95 gt and got a lot of ideas in mind what would you recommend tho I do plan on using nitrous but want to get the most out of my all motor setup to use a smaller nitrous shot to hit my 450hp goal.

[greapsoho]

Hey Brother cool build. I'm out in Lorain county, on the other side of the city. I imagine you take it out to Thompson, but you ever head to Dragway 42 or Summit?

[austintillman]

How much does a budget turbo build cost? I'm thinking of doing the same to a 1988 Lincoln

[ScottBroder]

Would this be a reliable build for a convertible 89 5.0?

[blacksheepautoworx]

I have 2 pairs of e6 heads, not great heads i know but 1 set is completely rebuilt and going dirt poor budget on this one. Stock block and ring gap, have you seen anyone put boost to these? and do you have any idea on valve springs i can use with no machining? Channel is great love the content thanks

[parkersgarage]

I dont mean to pry but i noticed a comment about erie pa. Im in erie pa myself and looking into picking up something.