How to Finish a Table - How to Apply Rubio Monocoat

How to finish a table by applying Rubio Monocoat. In this video, I’ll show you how to apply two coats of Rubio monocoat. I discussed this technique with other makers as well as Rubio themselves. Rubio says most woods only need one coat, however, you can apply a second coat to species like walnut. There are some tips and tricks you need to know to avoid some potential problems though. Since this is designed to be a one-coat finish.

Related videos and blogs:

Items used in this video:

[asere]

Cam, awesome video AS ALWAYS, Question, How much drying time between 1st and 2nd Rubio coats? Thanks a lot

[michael.schuler]

Cam, thanks for these great Rubio videos (and your many others.) Just finished with Rubio for the first time on a pretty spectacular bookmatched walnut free edge dining table, and before each and every step of the finishing process I reviewed the applicable segment of your video as tutorial. Your brief summary captions at the end of the video were particularly useful. I got a beautiful natural result and felt in control of the process throughout --- no doubt avoided a number of newbie errors that could have turned my peaceful maiden voyage into a frantic nightmare. It felt like you were right there giving me instructions mano a mano. Thank you!

[michaelfmarcos]

Man I'm about 2 months into my first epoxy table, tonight I'm about to do the Rubio finishing, and I just have to say thank you for all your content. I get into a lot of hobbies and people usually ask where I learn from. My usual response is "Youtube University" but for all the stuff I've been doing over the last couple months, my answer has been Blacktail Studio. I've been woodworking for 2 years and learned a lot from a lot of content creators, but this project has been particularly rewarding and I have, effectively, you to thank for it. Thanks so much for all you do!

[willgould]

Cam, thank you for 2nd coat technique. My walnut table was not quite there after the mono coat. I debated leaving it. Glad I did coat 2. Cheers.

[JaytheP]

Cam, using your steps I made my walnut butcher block look the best it ever has. I’ve used tons of finishes and the Rubio (after 2 coats) looks insane. I think using maroon pads/steel wool after the first coat makes the second coat wipe on like magic. So beautiful, thanks to you.

[mosesfisher]

Cam, I made it to the end like I do every time. I don’t have a question just wanted to let you know you are doing a fantastic job of instruction and complete information. 🤘

[Asian]

Magic definition - chemistry and physics 😀, and that's why magic worked here in our daya to day life. Thank you🙏.

[sdscottie]

Cam, such beautiful work! I am refinishing a walnut table and am tempted to sand it back to its natural state (again....) and finish with the oil. I've struggled with the oil based poly finish and think the oil is a much more beautiful finish. Thank you!

[montesimpson]

I feel so motivated to start a project everytime I finish one of your videos 💡✏📐🔨

[dwayneford]

I think your finishes are classy, timeless and perfect for the wood species. A lot of people like the very shiny epoxy flood coat look. I think that's just a fad or something that might be fine for a bar top but for these big beautiful tables your finishes are the best I've seen.

[stephanelarose]

CAN - WOW! As being a rookie that is about to start doing epoxy, to my opinion you said it all. thanks

[lynetteyoung]

Cam, Thank you for making these videos. I enjoy watching wood, especially walnut, come to life through your expertise. I have loved walnut wood since I saw an Aunt harvest it from her property and have it made into her kitchen cabinets. I was a teenager then and finally when I had my own kitchen remodeled at the age of 50, I had my cabinets made from walnut. I was asked what kind of stain I wanted them to apply and I felt surprised, wondering why anyone would do that to walnut. I replied that I wanted something clear so I could see the wood. My refrigerator, trash compactor, and dishwasher are fronted with walnut. It is a most beautiful room. Watching you work with wood is such a joy. Again, thank you from Syracuse.

[dirtydandinoman]

I dont come here to learn to build my own table, I come because its

-Relaxing
-Informative
-Fun
-Nice to watch

[brucedutchuk]

Love your work, as most everyone does!! I would love to see the video where you review different finishes. A contrast between higher end products and, of course, lower tier products.

[clivine]

coating video's are the best. I'm a hardwood floor guy and Rubio is known for showing sanding flaws. great job. fun and knowledgeable watch. I love coating hardwood and now I'm getting into tables for fun. great work.

[willjennison]

Cam tomorrow my son and I are taking some spalted maple we cut and milled to the kiln.!when we get it back your videos have given us the courage to try our first table. So thank you!

[rogdotcom]

Cam, holy crap, love the legs on that table, absolutely awesome 👍. Great video on the finishing, learned lots !!
Thanks

[dannybruce]

Cam, as I stated in another comment, I've had a lot of experience sanding and buffing many projects. Two things I would suggest. First, always use a mask and wear full body protetion like a zip up worksuit. Looks goofy, but it's worth it. Even when sanding wood. After two decades of working I had a sudden allergic reaction to wwood resin produced by sanding. If I hadn't been wearing a mask I woudn't be here today. My doctor said it happens. Also, I'd suggest to anybody who is interrested in perfect finishes to make friends with a local bodyshop as they have great knowledge and can advise on sanding and buffing tools and tecniques and materials that can result in spectacular results.

[jamesmatthews]

I prefer having your narrations. With you explaining what and why you're doing somthing, . . . I too, can learn! Keep up with your videos as you have. I won't ever complain!

[skidave]

Cam, thank you for the thorough demonstration. Working with this product for the first time, it’s going to finish a custom handrail for my basement renovation, plus a few other details. Using mahogany and should look amazing once completed. Thanks for the inspiration as always!