5 Things New Diode Laser Engraver Owners NEED to Know

It's hard to know what you don't know about getting started with a laser engraver and in this video I share 5 things every new diode laser owner needs to know! Including how your diode laser engraver is slowly trying to kill you.

Mentioned in the video:

Disclaimer: The content presented in this video is for entertainment purposes only. The information provided is not intended to substitute or replace professional advice, and viewers should not rely solely on the information presented in this video. Viewers should always do their own research and consult with professionals in the appropriate fields before making any decisions based on the information presented. The creator of this video does not guarantee the accuracy, completeness, or usefulness of any information presented in this video.

[digitalghosts]

Invaluable video! I really love how informative this video is and how it goes against dumb hype in a very informative and professional way and will probably save people from loosing thousands of dollars on the wrong tools or health bills, by properly educating them before they buy something bad. I've heard of so many people running those open engravers in their rooms without any fume exhaust or enclosure and I was just in sheer disbelief that they didn't even ask themselves how dangerous it can be...

[TS-ezrf]

Seriously. This video should be a MUST WATCH for ANYONE looking to start working with ANY laser. Great job sir!

[raikok]

you are the first person to even mention doing a sloping focus test, nor have i been able to come up with this idea myself. thank you and instantly subscribed!

[johanvdp]

Aside from the great content, you have the most perfect voice for instructional videos! Well done!!!

[gunshooter]

I just bought a xtool S1 20w laser. It seems like xtool has taken care of a lot of the issues you are talking about. That being said, YT has a myriad of videos to watch and learn about all of the issues you covered here. Thanks for the valuable information.

[theamaturepro]

You might be the first person selling a video course that I buy into. I don't even know if there's a cost, but if so, you've earned my business! I appreciate that you're advertising teaching how to use something without any wild promises or benefits. This is the first video I've seen of yours so I'm excited to see what your channel has to offer! Thank you.

[Zetman]

Thank you for this video! Very informative, I had no idea if the 20w Diode laser would cut metal or acrylic before I bought it

[HTMLguruLady]

This is THE BEST intro to diode lasers video on YouTube!! Thank you for making it.

[barrybaker]

yep getting started with all this is so hard . if your not good with laptops and software you will need help . saying that they are a great addition to any work shop

[TheFalconJetDriver]

I have been using diode lasers for 5 years plus. And I agree with everything thing you have to say. 😁🛫

[paullampru]

I have a screened in porch. 20x20 feet. When it rains, some mist will come in. Can I keep and use the lazer there…keeping it covered up when not in use?😮

[holliday]

Hi friend, if i buy lightburn still will need a graphics software in order to precess images and then pasto to lightburn to cut or engrave? so far i got a sculpfun s30 22w thanks a lot!

[cindywhite]

I have an xtool F1 ultra – and I use their software~ can you use Lightburn with my machine? Also, I was, but I’m confused as to what level of Lightbourn software I need. Thank you.

[tseckwr]

Thanks for making this video. Eye safety is foremost in laser use.

[names]

THIS IS BY FAR THE BEST LASER VIDEO I HAVE SEEN, GREAT JOB ON THE VIDEO, YOU ARE RIGHT ON EVERYTHING YOU SAID, I HAVE SAID THE SAME EXACT THINGS MANY TIMES, WHEN I FIRST GOT MY LASER, I WATCHED A LOT OF LASER VIDEOS TO HAVE NO ANSWERS, EVEN MORE CONFUSED AND FRUSTRATED MORE THAN BEFORE, ONCE I DECIDED TO TRY THINGS MY WAY, THINGS WORKED OUT, NOW ENGRAVING IS EASY ON A 20 WATT DIODE LASER, I KNOW WHAT WORKS, WHAT DOES NOT, WHERE I MAKE MISTAKES, AND HOW TO CORRECT THEM, THERE ARE ACTUALLY A LOT OF THINGS TO LEARN AND KNOW, LIKE WHERE TO SET UP LASER, ANCHORING LASER TO A TABLE TO PREVENT MOVEMENT OR SHIFTING OF THE LASER UNIT, A LASER ENCLOSURE(I MADE MY OWN), EXHAUST FAN AND FILTER, COOLING SET UP FOR KEEP THE AIR COOL INSIDE OF THE ENCLOSURE, CLEANING THE LASER, MAINTENANCE OF THE LASER, POWER SPEED NUMBERS FOR DIFFERENT MATERIALS, THAT TAKES A LOT OF TIME AND A LOT OF TEST, I HAVE A NOTEBOOK WITH ALL OF THE NUMBERS POSER SPEED MATERIALS, TYPE OF FINISH, PREPARATION OF MATERIALS BEFOR LASER ENGRAVING, THERE IS MUCH KORE, ALSO SETTING UP THE PROJECT ON THE COMPUTER, AND ALL OF THOSE SETTINGS, THERE IS MUCH MORE THSN THIS, BUT IT EVENTUALLY BECOMES SECOND NATURE

[michaelbuzbee]

Very good video but I need to know one thing. What was that noise at 4:06?

[jf]

I wonder if the laser manufacturers default to having YouTuber creators do their training for them? Unpaid, of course. So glad I found you, my first ever diode laser arrives Friday.

[yvonneomalley]

I can't afford your course but it does sound good for all newbies, good luck everyone

[BB-hcei]

In one of your videos, you mention an online training video. Where do I find this? I’m new to diode laser. I need someone to walk me through this process. Thank you.

[youteacher]

I was trained as a CNC miller on Siemens and Haas but have been a mechanic for last couple of years. I also have some basic experience with photoshop and video editing.
So the learning curve after getting a laser 3 days ago wasn't to bad. Even the g-code is pretty basic actually compared to milling.

But if you have none of that background it's gonna be a wild ride. 😅