How to Calibrate and Adjust the Wastegate Actuator on your Turbo

***FOLLOW US BELOW ***
Ph: 801-930-8404

[josepolanco]

You are the best at giving directions! Thanks so much for the video.

[firoznanji]

Very well explained. I have 2007 Nissan Qashqai, 1.5dci, wanted to set my turbo. Thank You

[abolfazljalambadani]

This video is very very helped to all.best regards🙏🙏🙏🙏🙏

[Fred_Durst]

hey thanks for the instructions. if I just turn the arm, instead of taking off the clip, will it damage the wastegate actuator?

[fredastaire]

this is super helpful! Thank you for posting this
I was about to return my TiAL Wastegate because I though it didnt fit right, lol!

[radeek]

i have shortened the Actuator fully but it would still needed to be shorter little bit. Do you think that the spring in the actuator need to be replaced? it still leaks the pressure under the load.

[ZackZaqZakXah]

Is it necessary to lubricate the shaft (rod) linkage at the entrance to the vacuum housing and where the e-clip is located?

[orogenbolom]

Does a malfuction wastegate, meaning not opening can make exhaut gas backflow into engine thru valve via ex manifold?

[joaoteixeira]

Hello. Audi A3 8L 1.9TDI (110hp AHF Engine) doesnt make any difference adjusting the wastegate actuator in terms of boost. It has the original garret turbo, and the actuator is working fine as I have tested (n75 valve) with VAG and it works.

What am I missing?

Thanks

[aiden]

Best way to set up an actuator is a mityvac with the correct settings well done

[devinlewis]

I am having a issue not shure if its the vgt part on a 870 cummins when i am jaking i barely get 10 psi on my turbo boost pressure i am thinking maybe the vanes arent shutting all the way down but i am no turbo expert

[headtungsram]

So if your factory boost pressure is 30 psi than the wastegate should start moving at this pressure?

[BollerRory]

If my waste gate is stuck open can I tighten the actuator to the closed position so I get boost again

[bryandemonteverde]

From philippines..can you.add..external spring.to add load.?

[vladimirkrtinic]

On my e60 525d acutator making beep sound after I turn engine of and making misfire down power in higher revs?

[merrillmillsjr]

When your truck is off is the waste gate in the open or closed position?

[atoxb]

Mine has been rattling and I will do this process tomorrow but, should I tighten it?

[randberr]

I took the mounting nuts off the wastegate and wedged it with a nickel and now have boost all the time even after 5000 rpm

[harisonedwards]

Hey guys, my tbd doesnt have any lock nuts on the actuator, is the turbo made to be “fixed” or am I missing something? Cheers

[gsdhillon]

Mine bmw 328i 2013 has this thing loose ..should i need to change full turbo ? Mechanic said to change full turbo for 2300$