RA-Tech WE Trigger Set Review

Ratech Steel Trigger set - I highly recommend this one. It fixes all the issues with the trigger and it will likely never break again. Go ahead and get it. No mods are needed, just drop it in and enjoy.

[JosefMucha]

Do we have more users of the RAtech trigger here? What's your experience with it?

[DamonRagnar]

I hear people say get a VFC but man, getting parts is always a damn problem

[theforge]

i'Ve installed Ratech Products in My WE HK416, G36K/C the, My friend'S Scar-L.

some model need you to trim down the trigger because of it have a different dimmension compared to original one. ratech one a bit thicker
and keep the original valve locker, Usually u need to keep to use the original valve locker to make it work

You can set how far you trigger reset by adding those foam tape below the trigger on the side that touch the base of the lower receiver

the angel custom one is more accurate and well made imho

[skallycz]

When my KAC PDW start shooting Just full auto a change sear and Hammer for ratech and it works nice and smooth.

[Atrocious_fruit]

I have one in my we scar. Got it September 8th 2022 and the semi stopped working November 6 2022. Now it has the double shot problem as well as full auto in semi auto.

[towojtektt]

Whare d'you bought ra tech triggerbox?

[dorinmihai]

When can we expect a GBBR M4 project from you and @NOVRITSCH ??

[slamsgt]

I installed the we tech trigger set, but sadly i have some issues, where the trigger is too sticky so when i pull trigger i have to push it for it to actually reset...

[TaZSAGA]

Mine is often firing two shots on semi and causing a jam. What's the suggested fix?

[adrinalin]

warum kann ich meine sicherung einlegen obwohl die waffe nicht gespannt ist.
sie is stock frisch ausm kartong.

[NerveJascha]

I got the Ratech Trigger set in my WE SCAR H, got the set with the valve locker etc, waste of money, didn't work, had to use the original locker. with that it worked fine though

[fragon]

Čus, používáš pořád propan? nebo si přešel na něco jiného?

[Splina.]

you should check your trigger...normally it should't go on safe without the hammer cocked
i have this replica stock...it works
or is this because you modified the full-auto parts? :P

and yes...this is one of the few RA things that are actually good...the only misery is that they are disgustingly overpriced...as always
i got a secondhand G36 with Ra trigger...it was the best deal i ever had

if you can get them at a decent price they are just perfect

[maccumhaill]

Mine steel set would not reset and is still not perfect. Had to shave a lot of bottom rear of trigger. Is this the CNC set?

[youraveragerat]

What is the inner barrel length for this gun?

[kiste]

why not just get a VFC? a new WE with a ra-tech triggergroup will cost more than a decent VFC one... (at least in my country)

[남선생-hw]

라텍이고 할배고간에 집탄성은 그냥 던지고싶은 We M series... ㅠ