How To Replace a 2 Stroke Motorcycle Throttle Cable

Shop: Two Stroke Throttle Cables

Is your motorcycle's throttle cable getting sticky and hard to twist? Watch this video where we walk you through the steps to smooth out your throttle! We demonstrate tips like how to lube your throttle cable and how to position your throttle tube on the handlebars. If your throttle cable is toast, don't sweat, we have a large variety of aftermarket and oem cables to get you back on the bike and twisting that throttle!

How To Replace a 4 Stroke Throttle Cable

Click Here To Subscribe To Our Channel!

Follow Us On Social Media!

[parkdog]

Rocky Mountain ATV MC for all your 2 Stroke needs

[stingr]

Thx man. My cable snapped and I had no idea how I was going to fix it

[brandonlachance]

Used this for my cr250 worked great! Only real difference was the throttle cap mechanism which was really a simple device.

[mikespain]

If only it were that easy in real life.

[_Drae]

This video doesn't talk about slide and idle position, which I guess could be a video of it's own. Since you were installing a new cable it would be nice to note where the slide is on the intake side so that the idle isn't so high the bike doesn't start. Think I have that problem with my bike because it had compression, fule, and spark but wouldn't start or try to start.

[albertalberto]

I have a single throttle cable on a four stroke

[robertbarba]

Do a video on how to adjust clutch cable on 2 stroke

[angelomills]

When I turn to the right the bike revs as if it’s pulling the throttle, throttle route looks similar if not same as here, and suggestions

[justanother]

Well put together and clear instructions

[mx]

Does the slide just go back in with no problems or adjusting

[Bayfieldboyy]

did this and now bike revs high and it never use to do that any solutions ???

[niallschepers]

I've installed a new throttle and cable but when I start it, it just reves up to full throttle when the throttle tube isn't even turn?.
What should I Do?

[the_ltz_guymaster]

I’m have a 98rm250 and if it slide it forward or backwards it will shut the bike off or rev up

[leelafarlett]

About how much space between the slide and carb?

[canyonguy]

I could not find any video, pictures or step by step directions to do this on a 1998 KLX 300. I also tried all the forums I could find.- Any help appreciated..

[Yea-dy]

Thanks a lot for thos vid!
I want to change the throttlebody on my husky sms 125, because i wanna get these awesome emig lock-on grips. Can you recommend andy good and affordable options?

[hendrixallan]

I've only managed to find double throttle cables for my single throttle cable 2 stroke derbi senda 2007 sm. Would it work with a double? Could they second one just act as a spare?

[daltonschaefer]

I can't get the spring to pull up wards so I can disconnect my throttle from the needle

[xxxlupas]

My tf 125 suzuki has a problem electrical issue, it started when I was welding the tail light holder I only removed two cables on the tail lights Instead of the three of them from that time it has never given me a lights even my neutral light doesn't because of that and honing nothing what can I do.

[Yuuiiytrfbh]

My throttle revs hard when I turn the handlebars full right. Is it time for a new cable, or do I just need the lube adapter thing? Thanks!